User manual DEI AUTOMATE OHD070A Owners Guide

[. . . ] OWNER'S GUIDE INSTALLATION GUIDE 7" Mobile Video System MODEL OHD 070A © 2004 Directed Electronics, Inc. N83070A 12-04 NON-TRANSFERABLE LIMITED CONSUMER WARRANTY Directed Electronics, Inc. (Directed) promises to the original purchaser that the automotive video monitor and/or source unit(s) (the Product), excluding accessories, purchased and installed from a Directed authorized dealer within ninety (90) days after purchase of the new vehicle, in which the Product is installed, will be free from defects in materials or workmanship under normal use and conditions for a period of three (3) years from date of purchase or the first 36, 000 miles as registered on the new vehicle's odometer reading at time of delivery of the Product for warranty service, whichever occurs first. Product purchased or installed more than ninety (90) days after the new vehicle is purchased are warranted for a period of one (1) year from date of purchase of the Product. [. . . ] PAUSE Pressing || on the remote control during playback will stop play temporary. Press PLAY on the remote control to resume normal playback. MUTE Will mute the audio, but the disc continues playing. When you unmute the audio (press MUTE again), audio will resume. © 2004 Directed Electronics, Inc. 17 REPEAT FOR DVD: Press the REPEAT button to cycle through the select repeat mode as follows: CHAPTER REPEAT ON--TITLE REPEAT ON--REPEAT OFF FOR VCD/CD: Press the REPEAT button to cycle through the select repeat mode as follows. When the player finishes playback of the current disc last chapter/track, it will stop and display the elapsed time. When REPEAT OFF mode is selected, REPONE &REP-ALL disappears from screen display. REPEAT feature does not support VCD2. 0 (with PBC ON). A-B A-B repeat allows a passage to be repeated continuously. Press A-B button at the start of the required passage, then press A-B button again at the end of the passage. Each time the button is pressed, the screen will display as follows: A TO B SET A A TO B SET B A TO B CANCELLED DISC SEARCH (GOTO) FOR DVD: Press GOTO button twice, the screen will display the following message: TITLE 01/01 TIME -- : --: -00:00:25 You can select the item you want to watch through the TIME setting by using numeric buttons and then the ENTER key. 18 © 2004 Directed Electronics, Inc. FOR CD/VCD (WITH PBC OFF): Press GOTO button once, the screen will display the following message: GO TO -- : -00:00:25 Use numeric buttons to input the time directly. ZOOM Allows the picture to be increased in size. Press ZOOM to toggle among 1. 5 scale, 2. 0 scale and 3. 0 scale. RANDOM Press RANDOM button, track selection will be made in random order. Press RANDOM button again, "SHUFFLE OFF" appears and the mode is released. PROGRAM In stop mode, press PROGRAM button, the screen will display "PROGRAM P00:00". For example: press numeric button 4 and PLAY button, "PROGRAM P01:04" appears. It means track 4 will be played first. MODE SELECTION Press MOD button on the front panel of the unit or MODE button on the remote control to select among DVD, or AV mode. When the mode is selected, the corresponding mode indicator on the front panel will be illuminated. VOLUME LEVEL ADJUSTMENT Press VOL +/VOL- on the front panel or VOLUME +/- on the remote control to increase or decrease the volume level. © 2004 Directed Electronics, Inc. 19 LIGHT SWITCH The two car dome lamps on the unit will be illuminated depending on the lamp operation setting. There are three settings for the car dome lamp operation: OFF, AUTO, and ON. ON: To turn on the lamp. JACK FOR EARPHONE There are two jacks for earphones, one on each side of the DVD unit. You can connect an earphone to anyone of the jacks to receive audio. EARPHONE VOLUME ADJUSTMENT Slide the control on the side of the DVD unit to increase or decrease the volume level of the earphone. REMOTE SENSOR (IR) This IR sensor receives it's signal from the remote control. TURNING THE UNIT ON/OFF Press the POWER button on the front panel or on the remote control to turn the unit on or off. MONITOR RELEASE Press the button on the unit to deploy the screen display from the base of the uni. . Then the display can easily be adjusted for the best viewing. INFRARED TRANSMITTING WINDOW There are six infrared transmitting lights inside the window on the unit, the user can put on the infrared wireless headphones supplied with the unit and hear the audio signal without the use of wires or cables from the unit to the headphones. 20 © 2004 Directed Electronics, Inc. LCD Menu Operations MENU Press the MENU button on the unit or on the remote control during DVD or AV mode to display a menu of the adjustment items on the screen. ---------- ---------Press MENU button repeatedly to select among BRIGHT, CONTRAST, COLOR and TINT (For the unit with NTSC system) items and etc. Press VOL +/- buttons on the unit or VOLUME +/- buttons on the remote control to adjust the corresponding item. Note: When you set the TV TYPE item to "PAL" in "PREFERENCES SETUP", there is no "TINT" item to display. 20 25 45 10 ON 16:9 TRANSMIT The TRANSMIT item, can be set ON or OFF. When set it to ON, the sound signal is transmitted from the infrared window on the unit for use with infrared wireless headphones. SCREEN In SCREEN item, you can select appropriate TV aspect ratio (4:3 or 16:9) using the VOL +/VOL- buttons on the unit or VOLUME +/- buttons on the remote control. SEARCH This menu selection is not used with this model. © 2004 Directed Electronics, Inc. 21 On Screen Displays DISPLAY Press the DISPLAY button during playback to display the contents of the current disc on the screen. The following examples depict the display by disc type. DVD (1) Press DISPLAY for the first time: TITLE 01/03 CHAPTER 002/025 00:02:25 The present title number, total number of titles, the present chapter number, the total number of chapters of the disc currently being played will be shown on the screen, along with the elapsed time. (2) Press DISPLAY a second time: TITLE REMAIN 01:46:58 The remaining playing time for the title presently playing is displayed. [. . . ] Do not exert excessive force when cleaning the enclosure. CLEANING AND HANDLING DISCS HANDLING Dirt, dust, scratches and warping discs will cause misoperation. A disc should always be kept in its case when not in use to prevent from damaging. Do not place discs in the following places: 1. On the seats or dashboard. DISC CLEANING 42 © 2004 Directed Electronics, Inc. Use a dry soft cloth to wipe the surface. If the disc is quite dirty, use a soft cloth slightly moistured with isopropyl (rubbing) alcohol. [. . . ]