User manual DAXTEN SCOUTUTP

[. . . ] Installation guide Specifications Part No's 1018-108 1018-116 Switches SCOUTutp 8 port Switch SCOUTutp 16 port Switch 2364-01P 2364-01U 2364-01S CPU Adaptors SCOUTutp PS/2 CPU adapter SCOUTutp USB CPU adapter SCOUTutp SUN CPU adapter SCOUTutp Height Width Depth Weight SCOUTutp 8 port 4. 15cm / 1. 63" 21. 5cm / 8. 46" 12. 20cm / 4. 80" 0. 92 kg / 2. 0 lb SCOUTutp 16 port 4. 15cm / 1. 63" 21. 5cm / 8. 46" 12. 20cm / 4. 80" 0. 92 kg / 2. 0 lb Operating Temperature: 0~40° C ( 32 ~ 104° F) Storage Temperature: -40~70° C (-40 ~ 158° F) Humidity: 80% RH non-condensing Operating Systems DOS, Windows (9X, NT4, 2000, XP, 2003 Server) LINUX, UNIX, QNX, SGI, FreeBSD, BeOS, Open VMS, Novell, Alpha UNIX, HP UX, SUN Mouse PS/2, Wheel mouse, Intellimouse, 5-button mouse Resolution 1600x1200@85Hz Transmission distance Up to 10m (33ft) Power supply Internal switching 85-260 VAC 50 / 60 Hz Connections System RJ45 Serial RJ11 Local KVM HDD15 / PS/2 - MinDin6 / PS/2 - MiniDin6 CPU Adaptors Connections Video Keyboard/Mouse System Power Product weight Shipping weight Dimensions HD15 MiniDin6 RJ45 From computer's Keyboard port HD15 USB RJ45 From USB port 107g / 0. 23lb 300g / 0. 66lb 91 x 41 x 24mm / 3. 58 x 1. 61 x 0. 94" HD15 MiniDin8 RJ45 From computer's Keyboard port PS/2 USB SUN NOTE: This equipment complies with the requirements of European EMC directive 89/336 EEC in respect of EN55022 Class B, EN 50082-1 and EN 60555-2. This equipment has been found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. [. . . ] To install the software: Insert and start the Marketing & Documentation CD. To run the software from the CD: Choose Run SCOUTutp switch Control Software from CD. If the Security feature is activated, the software requires a password. Selecting a Com port (Serial port) During the Setup process you will be prompted to choose a Com port. Failure to select the correct Com port will result in the software running in demo mode. Computer icons Icon Meaning Computer is connected and switched on Computer is switched off or unconnected Icon Meaning Computer that you are presently connected to Connected and switched on computer with a Local Workstation attached and presently being used locally. After remaining idle for the Timeout period, it changes to yellow. When you first open the Control window the software automatically gets the status of the system, including the security access Settings. Communication Error If a Communication Error box appears when trying to scan the system, check that: The Serial download cable is connected to the computer's and SCOUTutp IP Manager's serial ports. The View menu From the View menu choose one of the following: -All computers, or only active switched on computers. -The Legend -The toolbar Selecting a computer To select a computer: Click on the computers icon. Control and monitor the selected computer from the keyboard and mouse connected to the SCOUTutp. The toolbar buttons The toolbar buttons are explained below. Get Status If for whatever reason there is a break in communication between the Control software and the system, click "Get Status" to get the current status of the computers in system. Read Configuration To see the current Settings of the entire system (names, scan Settings etc. ) click "Read Configuration". You view the computer Settings from the Control window and other Settings from the Edit menu ­ discussed below. Write Configuration With the Control software you can make changes to all OSD Settings. You can then save these configurations in a file to use in the future by selecting Save or Save As from the File menu. To change the OSD Settings you must press "Write Configuration" or choose Write Configuration from the File menu after making changes. The changes will then be sent to the SCOUTutp system Manager, and the OSD will reflect these changes. Renaming a computer To rename a computer: Type the new name in the box below the computer icon. Click "Write Configuration" to save the settings on the OSD. Or click Save or Save As, from the File menu to save the changes in a file and not alter the OSD names. Logon Passwords Settings Password protection When the SCOUTutp system is password protected, the Control software behaves in exactly the same way as the OSD. You must type in the required password to access the Control software. [. . . ] Scandinavian "*" key code conversion changes the scan code for the <|> (pipe character) key. Allows the operating system to control the "Num Lock" indicator. (Default mode uses <Scroll Lock> as a Mac "Power off" key). Esc Esc Esc Esc Esc O P Q T Y Service Information Technical Support If you cannot determine the nature of a problem, please call Daxten and ask for Technical Support. If possible, call from a phone located near the unit, as we may be able to solve your problem directly over the phone. [. . . ]