User manual D-LINK DVG-G1402S

[. . . ] DVG-G1402S User's Manual Table of Contents Table of Contents Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Click Apply to save your settings. Note: You must disable or uninstall the PPPoE software (Enternet 300, WinPoet, etc) from your computer. You do not need the software since the router is authenticating to your DSL provider. The software to connect to your service will not work through the router. Simply connect to the Internet by opening your web browser. D-Link Systems, Inc. 26 DVG-G1402S User's Manual Using the Configuration Utility Using the Configuration Utility (continued) Home > LAN IP Address: Subnet Mask: Apply: Enter the IP address you want to assign to the DVG-G1402S router. Click Apply to save your settings. D-Link Systems, Inc. 27 DVG-G1402S User's Manual Using the Configuration Utility Using the Configuration Utility (continued) Home > DHCP Name: State: Start IP Address: Gateway: IP Range: Leased Time: Apply: Enter a name for your DVG-G1402S unit (optional). If you disable DHCP, you must manually enter the IP settings on all your other network devices. Enter the starting IP address of the IP address range you want to assign to your network devices. Enter the number of networking devices that will receive IP addresses from the DVG-G1402S. Click Apply to save your settings. D-Link Systems, Inc. 28 DVG-G1402S User's Manual Using the Configuration Utility Using the Configuration Utility (continued) Home > DHCP > Static DHCP Name: IP address: Subnet Mask: Default Gateway: MAC Address: DHCP Client: Apply: Enter a name for your DVG-G1402S unit (optional). Manually enter the MAC address of the computer or device you want to assign. Select a device that has already been assigned an address from the drop-down list. Click Apply to save your settings. NOTE: When creating a Static DHCP entry, the IP address that you choose to have assigned needs to be in the range of the DHCP range. Entries created with IP addresses outside of this range will not take effect. D-Link Systems, Inc. 29 DVG-G1402S User's Manual Using the Configuration Utility Using the Configuration Utility (continued) Home > Proxy DNS State: Proxy DNS IP Address: Apply: Select Enabled or Disabled. Click Apply to save your settings. D-Link Systems, Inc. 30 DVG-G1402S User's Manual Using the Configuration Utility Using the Configuration Utility (continued) Advanced > Virtual Server Private IP: Protocol Type: Start Global Port: End Global Port: Start Local Port: Enter the IP address of the computer you want to open port(s) to. If you want to open only one port, enter the same port as the Starting Global Port. If you want to open only one port, enter the same port as the Starting Local Port. Click Apply to save your settings. End Local Port: Apply: D-Link Systems, Inc. 31 DVG-G1402S User's Manual Using the Configuration Utility Using the Configuration Utility (continued) Advanced > FIlter > IP Filter Pass or Block: Protocol: IP Address - Source: IP Address - Destination: Subnet Mask - Source: Subnet Mask - Destination: Source Start/End Port: Destination Start/End Port: TCP Flag: Firewall Rule State: Apply: Select Block or Pass. Click Apply to save your settings. D-Link Systems, Inc. 32 DVG-G1402S User's Manual Using the Configuration Utility Using the Configuration Utility (continued) Advanced > FIlter > MAC Filter MAC Address: State: Apply: MAC Table: Enter the MAC address of the wired computer or device to allow connectivity to the DVG-G1402S. Click the edit button to make any changes or click the trash can icon to delete the rule. D-Link Systems, Inc. 33 DVG-G1402S User's Manual Using the Configuration Utility Using the Configuration Utility (continued) Advanced > Firewall Pass or Block: Protocol: IP Address Source: IP Address Destination: Subnet Mask Source: Subnet Mask Destination: Source Start/End Port: Destination Start/End Port: Enter the MAC address of the computer or device to allow connectivity to the DVG-G1402S. In most cases, the source and destination port(s) will be the same. < : specifies the port numbers less than and equal to the Start Port number > : specifies the port numbers greater than and equal to the Start Port number = : sets the port number equal to the Start Port if there is no End Port specified; if an End Port number is specified, this defines a range of ports to filter. The range is defined as the port numbers between the Start Port and End Port, including the Start and End Port numbers. D-Link Systems, Inc. 34 DVG-G1402S User's Manual Using the Configuration Utility Using the Configuration Utility (continued) Advanced > Firewall (continued) TCP Flag: Firewall Rule State: Apply: Check the box to enable each of the optional TCP packet options. Click Apply to save your settings. D-Link Systems, Inc. 35 DVG-G1402S User's Manual Using the Configuration Utility Using the Configuration Utility (continued) Advanced > RIP RIP - Routing Information Protocol specifies how routers exchange information. [. . . ] Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK'S PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT. THE MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY. [. . . ]