User manual D-LINK DUB-E100

[. . . ] It also supports USB energy-saving suspend and resume functions to minimize power consumption, which is especially useful for laptop/notebook users. Features Designed for versatility and performance, the DUB-E100 USB 2. 0 10/100 Fast Ethernet Adapter provides the following: • Compliant with USB 2. 3 Ethernet standards • Plug-and-Play installation • Auto 10/100 Mbps speed detection • Supports half and full-duplex at 10 Mbps, half and full-duplex at 100 Mbps • One built-in RJ-45 connector • Auto-negotiation to the highest available speed • Two LED indicators: Link, TX/RX • Driver support: • Microsoft Windows 7 (x86, x64) • Microsoft Windows Vista (x86, x64) • Microsoft Windows XP (x86/x64 Edition) • Linux (kernel 2. [. . . ] Note: The DUB-E100 user interface may differ in appearance for different regions. d-Link DUB-E100 User Manual 7 Section 2 - Installation The Found New Hardware box will appear. D-Link DUB-E100 User Manual 8 Section 2 - Installation When the Windows XP driver installation is complete, you can connect the DUB-E100 to a USB port on your computer. Please then proceed to Connecting the Adapter to a Network on page 14. D-Link DUB-E100 User Manual 9 Section 2 - Installation Mac OS X The following screenshots were taken from Mac OS X 10. Please insert the DUB-E100 CD into your computer’s DVD or CD drive, then go to the DUB-E100 folder and navigate to \Drivers\MAC. If you wish to change the drive where the installation will take place, click Change Install Location. D-Link DUB-E100 User Manual 11 Section 2 - Installation If you clicked Change Install Location, you will see the Destination Select screen. The computer will then restart itself after the installation is complete. Please then proceed to Connecting the Adapter to a Network on page 14. Also, please make sure the kernel is built with “Support for Host-side, EHCI, OHCI, and UHCI” option. Insert the CD into the CD drive of your computer and go to the Drivers\Linux\ directory. 14_REV101 folder and execute the following command to compile the driver. If you want to use modprobe command to mount the driver, execute the following command to install the driver on your Linux. Ko or [root@localhost anywhere]# modprobe asix To unmount the driver, just typing the following command: [root@localhost anywhere]# rmmod asix [root@localhost anywhere]# rmmod usbnet Please then proceed to Connecting the Adapter to a Network on page 14. D-Link DUB-E100 User Manual 13 Section 2 - Installation Connecting the Adapter to a Network Attach an Ethernet cable to the Ethernet port on the DUB-E100. Attach the other end of the Ethernet cable to your network switch, hub, or router. D-Link DUB-E100 User Manual 14 Section 2 - Installation Completing the Installation When the installation of the DUB-E100 is complete, the Speed LED will illuminate solid green when the DUB-E100 is connected to a 100 Mbps network and remains off when connected to a 10 Mbps network. The Tx/Rx LED will flash amber when data is being transmitted or received. If both LEDs are unlit, there may be a problem with the physical connection. [. . . ] €¢ Expand the Network Adapters heading by clicking on the plus (+) sign next to Network Adapters. • Right-click on the My Computer icon and select Properties. €¢ The D-Link USB DUB-E100 should appear with a green and gold network adapter symbol. If the D-Link USB DUB-E100 in Device Manager appears with a bright yellow exclamation mark or a red x, please contact D-Link Technical Support. [. . . ]