User manual D-LINK DSL-2730U

[. . . ] 91 D-Link DSL-2730U User Manual 3 Section 1 - Product Overview Package Contents • • • • • • • DSL-2730U Wireless ADSL Router Power Adapter CD-ROM with User Manual One Micro Splitter One twisted-pair telephone cable used for ADSL connection One straight-through Ethernet cable One Quick Installation Guide Note: Using a power supply with a different voltage rating than the one included with the DSL-2730U will cause damage and void the warranty for this product. system Requirements • • ADSL Internet service Computer with: • 200MHz Processor • 64MB Memory • CD-ROM Drive • Ethernet Adapter with TCP/IP Protocol Installed • Internet Explorer v6 or later , FireFox v1. 5 • Computer with Windows 2000, Windows XP, or Windows Vista D-Link DSL-2730U User Manual 4 Section 1 - Product Overview 11 Features • • • PPP (Point-to-Point Protocol) Security – The DSL-2730U ADSL Router supports PAP (Password Authentication Protocol) and CHAP (Challenge Handshake Authentication Protocol) for PPP connections. DHCP Support – Dynamic Host Configuration Protocol automatically and dynamically assigns all LAN IP settings to each host on your network. [. . . ] In ATM mode, if only a single PVC with IPoA or static IPoE protocol is configured, Static DNS server IP addresses must be entered. DNS Server Interfaces can have multiple WAN interfaces served as system dns servers but only one will be used according to the priority with the first being the higest and the last one the lowest priority if the WAN interface is connected. Priority order can be changed by removing all and adding them back in again. Click the Next button to continue D-Link DSL-2730U User Manual 41 Appendix A – Troubleshooting WAN Service Configuration – PPPoA This summary window allows you to confirm the settings you have just made. Click the Apply / Save button to save your new PPP over ATM settings and restart the Router. D-Link DSL-2730U User Manual 42 Appendix A – Troubleshooting WAN Service Configuration – IPoA This window allows you to enter service description. WAN Service Configuration – IPoA This window allows you to configure the WAN IP settings. D-Link DSL-2730U User Manual 43 Appendix A – Troubleshooting WAN Service Configuration – IPoA This window allows you to enable or disable Network Address Translation and a firewall for your Router. WAN Service Configuration – IPoA Default gateway interface list can have multiple WAN interfaces served as system default gateways but only one will be used according to the priority with the first being the higest and the last one the lowest priority if the WAN interface is connected. Priority order can be changed by removing all and adding them back in again. D-Link DSL-2730U User Manual 44 Appendix A – Troubleshooting WAN Service Configuration – IPoA Select DNS Server Interface from available WAN interfaces OR enter static DNS server IP addresses for the system. In ATM mode, if only a single PVC with IPoA or static IPoE protocol is configured, Static DNS server IP addresses must be entered. DNS Server Interfaces can have multiple WAN interfaces served as system dns servers but only one will be used according to the priority with the first being the higest and the last one the lowest priority if the WAN interface is connected. Priority order can be changed by removing all and adding them back in again. Click the Next button to continue WAN Service Configuration – IPoA This summary window allows you to confirm the settings you have just made. Click the Save/Reboot button to save your new IP over ATM settings and restart the Router. D-Link DSL-2730U User Manual 45 Appendix A – Troubleshooting LAN You can configure the LAN IP address to suit your preference. Many users will find it convenient to use the default settings together with DHCP service to manage the IP settings for their private network. In order to use the Router for DHCP on your LAN, the IP address pool used for DHCP must be compatible with the IP address of the Router. The IP addresses available in the DHCP IP address pool will change automatically if you change the IP address of the Router. To access the Local Area Network (LAN) Setup window, click the LAN button in the Advanced Setup directory. D-Link DSL-2730U User Manual 46 Appendix A – Troubleshooting To access the IPv6 LAN Auto Configuration window, click the IPv6 AutoConfig button in the LAN directory. [. . . ] ISP username and password, are the same as the settings that have been provided by your ISP. d-Link DSL-2730U User Manual 87 Appendix A – Troubleshooting 4. For ADSL ISP users, please contact your ISP to make sure the service has been enabled/connected by your ISP and that your ISP username and password are correct. What can I do if my router can’t be detected by running installation CD? [. . . ]