User manual D-LINK DI-714P-

[. . . ] D-LINK AirPlus DI-714P+ Enhanced 2. 4 GHz Wireless Router Manual Building Networks for People 10142004 v140 Contents Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Wireless Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Using the Configuration Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Installing the Print Server Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Configuring the Print Server Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Networking Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Contacting Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 2 Package Contents Contents of Package: D-Link AirPlus DI-714P+ 2. 4GHz Wireless Router Power Adapter ­ 5V DC Manual on CD Quick Installation Guide Note: Using a power supply with a different voltage rating than the one included with the DI-714P+ will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller. System Requirements For Configuration: Ethernet-Based Cable or DSL Modem Computer with Windows, Macintosh, or Linux-based operating system with an installed Ethernet adapter Internet Explorer version 5. 5 or Netscape Navigator version 4. 79 and above, with JavaScript enabled 3 Introduction The D-Link AirPlus DI-714P+ Wireless Broadband Router is an enhanced 802. 11b high-performance, wireless router with a printer port. It is an ideal way to extend the reach and number of computers connected to your wireless network. [. . . ] The device can also be reset back to factory default settings by clicking on "Reset to Default" button. Make sure to save your system settings before doing a factory restore. Save Settings to Local Hard DriveLoad Settings from Local Hard Drive- Click Save to save the current settings to the local Hard Drive Click Browse to find the settings file, then click Load Restore to Factory Default Settings- Click Restore to restore the factory default settings 32 Using the Configuration Menu Tools > Firmware You can upgrade the firmware of the device using this tool. Make sure that the firmware you want to use is saved on the local hard drive of the computer. Click on "Browse" to search the local hard drive for the firmware to be used for the update. Upgrading the firmware will not change any of your system settings but it is recommended that you save your system settings before doing a firmware upgrade. Please check the D-Link support site for firmware updates at http://support. dlink. com. Browse- After you have downloaded the new firmware, click Browse in this window to locate the firmware update on your hard drive. When the upgrade is complete, the unit will be restarted automatically. 33 Using the Configuration Menu Tools > SNMP SNMP (Simple Network Management Protocol) is a widely used network monitoring and control protocol that reports activity on each network device to the administrator of the network. Enable SNMPLocalRemoteGet Community(Simple Network Management Protocol) LAN (Local Area Network) WAN (Wide Area Network) Enter the password public in this field to allow "Read only" access to network administration using SNMP. You can view the network, but no configuration is possible wth this setting. Enter the password private in this field to gain "Read and Write" access to the network using SNMP software. The administrator can configure the network with this setting. Set Community- 34 Using the Configuration Menu Tools > DDNS Users who have a Dynamic DNS account may use this feature on the DI-714P+ itself. DDNS- (Dynamic DNS) when an IP address is automatically assigned by a DHCP server, DDNS automaticaly updates the DNS server. Select Disabled or Enabled Select from the pull-down menu Enter the Host name Enter the username/email address Enter the password/key ProviderHost NameUsername/EmailPassword/Key- 35 Using the Configuration Menu Tools > Misc Ping Test- Use the Ping test to send ping packets (ICMP) to test if a computer (host) is on the Internet. Restart Device- Click reboot to restart the unit. Block WAN Ping- Click Enabled to block the WAN ping. Computers on the Internet will not get a reply back from the DI-714P+ when it is being "ping"ed. If an FTP server you want to access is not using the standard port 21, then enter in the port number that the FTP server is using instead. Non-standard FTP port- 36 Using the Configuration Menu Status > Device Info This screen displays information about the DI-714P+ such as WAN, LAN, and Wireless status. DHCP Renew- Use this button to reconnect to your ISP, if your WAN connection is set up for DHCP. DHCP Release- Use this button to disconnect from your ISP, if your WAN connection is set up for DHCP. Refresh- Click to refresh the information. 37 Using the Configuration Menu Status > Log This log page displays logs of activities and events that are occuring through the DI-714P+ Status > Log Settings Syslog Server- Enter in the IP address of a syslog server within the network. The DI-714P+ will send all of it's logs to the specified syslog server. The DI-714P+ can be set up to send the log files to a specific email address. Enter in the IP address of the mail server. E-Mail Alert- SMTP Server IP- Send E-Mail alert to- Enter in the email address of the recipient who will receive the email log. 38 Using the Configuration Menu Status > Stats This screen displays the Receive and Transmit packets passing through the DI-714P+. Click on Refresh for the most recent information and Reset to clear the counter. Status > Wireless This screen displays the connection time and the MAC Address of the connected wireless clients. Click on Refresh for the most recent information. . 39 Using the Configuration Menu Help This screen displays the complete Help menu. [. . . ] Disclaimer of Other Warranties: EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED "AS-IS" WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH DLINK'S PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. [. . . ]