User manual D-LINK DI-614 PLUS QUICK INSTALLATION GUIDE

[. . . ] This product can be set up using any current web browser, i. e. , Internet Explorer 6 or Netscape Navigator 6. 2. 3. DI-614+ 2. 4GHz Wireless Router Before You Begin 1. If you purchased this router to share your high-speed Internet connection with other computers, you must have either an Ethernet-based Cable or DSL modem with an established Internet account from an Internet Service Provider (ISP). It's best to use the same computer that is connected to your modem for configuring the DI-614+ Wireless Router. [. . . ] If the WAN LED is not illuminated, please go back to step B1 and repeat the instructions. Insert an Ethernet cable to LAN port 1 on the back panel of the DI-614+ and an available Ethernet port on the network adapter in the computer you will use to configure the DI-614+. The LED light for LAN Port 1 will illuminate to indicate proper connection. Meaning you can use a straight-through or crossover-Ethernet cable to the LAN Ports. ) D. Computers equipped with 802. 11b wireless adapters will be able to connect to the DI-614+. The DWL-650+ AirPlus Wireless Cardbus Adapter and the DWL520+ AirPlus Wireless PCI Adapter will be able to connect out of the box with the router using their default wireless settings. D. LAN PORTS These are the connections for Ethernet cables to Ethernet enabled computers. B. WAN PORT This is for the connection of an Ethernet cable to the Cable or DSL modem Reset Button Pressing this button restores the Router to its original factory default settings. A. Receptor for Power Adapter. 2 Restart Your Computer Connecting Additional Computers To The DI-614+ M2 LED ­ A solid light indicates that the unit is defective. Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped computers to the remaining Ethernet LAN ports on the back panel of the DI-614+ M1 LED ­ a solid light indicates that the DI-614+ is ready. WAN LED ­ a solid light indicates connection on the WAN port. This LED blinks during data transmission. POWER LED ­ a solid light indicates a proper connection to the power supply. WLAN LED ­ a solid light indicates that the wireless segment is ready. This LED blinks during wireless data transmission. LOCAL NETWORK LEDs ­ a solid light on the port indicates a connection to an Ethernet enabled computer on ports 1-4. This LED blinks during data transmission. When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this: 3 Using The Setup Wizard Open your Web browser and type "http://192. 168. 0. 1" into the URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. Type "admin" for the username and leave the password field blank. Click OK Once you have logged in, the Home screen will appear. Click Run Wizard 4 The Setup Wizard (continued) You will see the following screens Click Next Set up your new password. You have the option to establish a password. Click Next Choose your time zone from the drop down list. Click Next 5 The Setup Wizard (continued) A this point, the setup wizard will try to auto-detect your Internet connection type. If you have a Dynamic or PPPoE connection, you will be brought to the corresponding page. Otherwise, you will see the following screen: Select your Internet Connection. You will be prompted to select the type of Internet connection for your router. If you are unsure of which setting to select, please contact your Internet Service Provider. Click Next If you selected Dynamic IP Address, this screen will appear: (Used mainly for Cable Internet service. ) Click the "Clone MAC Address" button to automatically copy the MAC address of the network adapter in your computer. [. . . ] D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. and Canadian customers can contact D-Link technical support through our website, or by phone. Tech Support for customers within the United States: D-Link Technical Support over the Telephone: (877) 453-5465 24 hours a day, seven days a week. D-Link Technical Support over the Internet: http://support. dlink. com email:support@dlink. com Tech Support for customers within Canada: D-Link Technical Support over the Telephone: (800) 361-5265 Monday to Friday 8:30am to 9:00pm EST D-Link Technical Support over the Internet: http://support. dlink. ca email:support@dlink. ca 12 [. . . ]