User manual D-LINK DGS-3312SR Reference Guide

[. . . ] DGS-3312SR Release 3. 5 12-Port Gigabit Layer 3 Stackable Switch Command Line Interface Reference Manual Third Edition (Oct 2005) Version 0. 35 Printed In China RECYCLABLE __________________________________________________________________________________ Information in this document is subject to change without notice. Reproduction in any manner whatsoever without the written permission of D-Link Computer Corporation is strictly forbidden. Trademarks used in this text: D-Link and the D-LINK logo are trademarks of D-Link Computer Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. [. . . ] Only administrator-level users can issue this command. DGS-3312SR Layer 3 Gigabit Switch To delete the server group "group_1": DGS-3312SR:4#delete server_group group_1 Command: delete server_group group_1 Success. DGS-3312SR:4# show authen server_group Purpose Syntax Description Used to view authentication server groups on the switch. show authen server_group <string 15> This command will display authentication server groups currently configured on the switch. This command will display the following fields: Group Name: The name of the server group currently configured on the switch, including built in groups and user defined groups. Parameters <string 15> - Enter an alphanumeric string of up to 15 characters to define the previously created server group the user wishes to view. Entering this command without the <string> parameter will display all authentication server groups on the switch. Restrictions None. DGS-3312SR:4#show authen server_group Command: show authen server_group Group Name IP Address ----------------------------Darren 10. 53. 13. 2 tacacs 10. 53. 13. 94 tacacs+ (This group has no entry) xtacacs (This group has no entry) Total Entries : 4 DGS-3312SR:4# Protocol -------TACACS TACACS config authen parameter response_timeout Purpose Used to configure the amount of time the switch will wait for a user to enter authentication before timing out. 157 DGS-3312SR Layer 3 Gigabit Switch config authen parameter response_timeout Syntax Description Parameters config authen parameter response_timeout <int 1-255> This command will set the time the switch will wait for a response of authentication from the user. response_timeout <int 1-255> - Set the time, in seconds, the switch will wait for a response of authentication from the user attempting to log in from the command line interface or telnet interface. Only administrator-level users can issue this command. Restrictions Example usage: To configure the response timeout for 60 seconds: DGS-3312SR:4# config authen parameter response_timeout 60 Command: config authen parameter response_timeout 60 Success. DGS-3312SR:4# config authen parameter attempt Purpose Syntax Description Used to configure the maximum number of times the switch will accept authentication attempts. config authen parameter attempt <int 1-255> This command will configure the maximum number of times the switch will accept authentication attempts. Users failing to be authenticated after the set amount of attempts will be denied access to the switch and will be locked out of further authentication attempts. Command line interface users will have to wait 60 seconds before another authentication attempt. parameter attempt <int 1-255> - Set the maximum number of attempts the user may try to become authenticated by the switch, before being locked out. Only administrator-level users can issue this command. Parameters Restrictions Example usage: To set the maximum number of authentication attempts at 5: DGS-3312SR:4#config authen parameter attempt 5 Command: config authen parameter attempt 5 Success. DGS-3312SR:4# show authen parameter Purpose Used to display the authentication parameters currently configured on the switch 158 DGS-3312SR Layer 3 Gigabit Switch on the switch. Syntax Description show authen parameter This command will display the authentication parameters currently configured on the switch, including the response timeout and user authentication attempts. This command will display the following fields: Response timeout ­ The configured time allotted for the switch to wait for a response of authentication from the user attempting to log in from the command line interface or telnet interface. User attempts ­ The maximum number of attempts the user may try to become authenticated by the switch, before being locked out. None. DGS-3312SR:4#show authen parameter Command: show authen parameter Response timeout: 60 seconds User attempts :5 DGS-3312SR:4# enable admin Purpose Syntax Description Used to promote user level privileges to administrator level privileges enable admin This command is for users who have logged on to the switch on the normal user level, to become promoted to the administrator level. After logging on to the switch users, will have only user level privileges. [. . . ] Il termine "Prodotto hardware D-LINK" NON comprende eventuali applicazioni o programmi software. Ambito geografico della Garanzia limitata La presente Garanzia è estesa a tutti i Paesi europei elencati nell'appendice "Paesi europei - Garanzia limitata dei prodotti D-LINK". Il termine "Paesi europei" si riferisce esclusivamente ai paesi nominati in questa appendice. La Garanzia verrà riconosciuta in tutti i paesi nei quali D-LINK o i suoi Centri di Assistenza 2 DGS-3312SR Layer 3 Gigabit Switch autorizzati offrono assistenza conformemente alle condizioni e ai termini stabiliti nella presente Garanzia. Tuttavia, la disponibilità all'assistenza e i tempi di intervento variano da paese a paese e possono essere soggetti a eventuali requisiti di registrazione. Limitazione della Garanzia D-LINK garantisce che i prodotti sotto descritti in condizioni di normale utilizzo non presentano difetti di fabbricazione o vizi di materiale durante il Periodo di garanzia sotto specificato ("Periodo di garanzia"), a condizione che vengano utilizzati e sottoposti a manutenzione in conformità con il manuale d'uso e con ogni altra documentazione fornita all'acquirente all'atto dell'acquisto (e relativi emendamenti). [. . . ]