User manual D-LINK DES-5016

[. . . ] 02 (October, 2004) 651DES32. K15 Copyright © 1999 by D-Link Systems, Inc. All rights reserved. D-Link Limited Warranty Hardware: D-Link warrants its hardware products to be free from defects in workmanship and materials, under normal use and service, for the following periods measured from date of purchase from D-Link or its authorized Reseller: Product Type Complete Products Spare parts and spare kits Warranty Period One year 90 days Your dealer, or your nearest D-Link office, can advise whether a longer period of warranty applies to your purchase, and if so, can provide you a separate certificate of supplemental warranty. The one-year period of warranty on complete products (or such longer period of warranty as may be offered as to your purchase) applies on condition that the product's Registration Card is filled out and returned to a D-Link office within ninety (90) days of purchase. A list of DLink offices is provided at the back of this manual, together with a copy of the Registration Card. Failing such timely registration of purchase, the warranty period shall be limited to ninety (90) days. If the product proves defective within the applicable warranty period, D-Link will provide repair or replacement of the product. [. . . ] In-band management refers to managing the DES-5016 through one of the MDI-X ports. The interface and options are the same with Local Console and Telnet Management. The difference is the type of connection and the port that is used to manage the DES-5016. The DES-5016 supports other SNMP management applications and uses standard MIB. Refer to appropriate documentation for installing and using other SNMP application programs. Refer to other documentation if you are using other vendors' SNMP applications. All instructions given in this chapter assume that you are logged into the DES-5016 and are at the appropriate panel for carrying them out. Managing the DES-5016 32 Fast Ethernet Switching System User's Guide Local Console Management Local Console Management is always done through the RS-232 serial port and requires a direct connection between the DES-5016 and a PC. This type of management is very useful when the network is down and the DES-5016 cannot be reached by any other means. Use Local Console Management to log into the DES-5016 for the first time. You do not need to know the IP address to log into the DES-5016 using Local Console Management. You can change all the settings and configure the DES-5016, set the IP address and perform other management functions. The management session will timeout after five minutes if you have not taken any action. Follow these steps to begin a management session using Local Console Management: 1. Attach the male end of the RS-232 serial cable provided with the DES-5016 to the RS-232 port located at the front of the DES-5016. Run a terminal emulation program using the following settings: · Emulation: VT-100/ANSI compatible · BPS: 19 200 · Data bits: 8 · Parity: None · Stop bits: 1 · Flow Control: None · Enable: Terminal keys 4. Press Enter to reach the Main menu. Managing the DES-5016 33 Fast Ethernet Switching System User's Guide Telnet You can manage the DES-5016 via Telnet session. Use Local Console Management to log into the DES5016 for the first time so that you can assign an IP address. Once you have assigned an IP address to the DES-5016, you can use the management method of your choice. Follow these steps to manage the DES-5016 through a Telnet session: 1. Log into the DES-5016. Managing the DES-5016 34 Fast Ethernet Switching System User's Guide Log In The Log In panel, displayed in Figure 18, is the first panel you see when connecting to the DES-5016. All management methods require you to log into the DES-5016 with your user name and password before beginning a management session. For security, you should change the default User Name and Password. Figure 18: Login Follow these steps to log into the DES-5016 for the first time: Enter the default User Name and Password and press Enter. [. . . ] 59 87 Fast Ethernet Switching System User's Guide Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Port # . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Port State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Port States. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]