User manual D-LINK DES-5004 Release Note

[. . . ] ZyXEL Prestige P128 1. 50 Release Note/Manual Supplement Date: August 17, 1998 This Release Note/Manual Supplement contains information about the new features, and bug fixes since the incremental release v1. 42(B. 03I). The New Features section lists the new features added to this release. Please read through the Enhancement Details section for detail information. A new section, Changes not Compatible to Previous Versions, is added to this release notes. [. . . ] If the Directory (Phone) number, DN-1, associated to POTS port 1 is used by an analog call, the incoming data call intended to DN-1 will be answered. The advanced ISDN features do not work on the analog call if there is an incoming data rollover call at the same time. 4. 2. 2. 4. 2 Outgoing Call Rollover For outgoing data call, there is no problem for Prestige to pick the unused Directory (Phone) number to place the call. Press flash to immediately put the existing call on hold and receive a dial tone. Press the flash hook button and immediately release it to establish a Three Way Conference Call. If you wish to do a blind transfer to the third party, the steps are: 1. Press flash to immediately put the existing call on hold and receive a dial tone. Before the third party picks up the call, you can transfer the call by pressing the flash and hanging up. 4. 2. 2. 7 Call Forwarding The Call Forwarding feature is supported by ISDN switch directly. The Call Forwarding feature of the POTS port can be activated and deactivated by using the phone set. The Call Forwarding is a telephone feature and will not impact incoming data call. Please request your phone company 8 for the instruction activate or deactivate the Call Forwarding feature. Here is the instruction written in Custom Calling Service section of Pacific Bell White Pages: To turn on, press 72#. If the line is busy or does not answer, repeat the above process and it will be activated even if the line is still busy. 4. 2. 2. 8 Reminder Ring Prestige will alert you every time a call has been forwarded by sending a single short ring to your telephone. This feature is just to let you know that your calls are being forwarded. 4. 2. 3 Call Waiting Support for DSS-1 In this release, the only supplementary service supported is Call Waiting. Please move cursor to the Advanced Setup fields in Menu 2 and select Yes, then press the "ENTER" key to pop up the ISDN Advanced Setup as below. Menu 2. 1 -- ISDN Advanced Setup Phone 1 Call Waiting= Enable/Disable Phone 2 Call Waiting= Enable/Disable By toggling the Phone 1 Call Waiting and Phone 2 Call Waiting fields, you can enable and disable the Call Waiting feature on the POTS port phones. Here is a brief description about the choices of this field: Disable: disable the Call Waiting feature on the specific phone. Enable: enable the Call Waiting feature on the specific phone. 4. 3 B-channel, CLID, and WAN IP Address Shown on Menu 24. 1 Menu 24. 1 has been separated into to two screens. The original static information in Menu 24. 1 has been moved to Menu 24. 2. 1 as below. 9 Menu 24. 2. 1 - System Maintenance - Information Name: 1. 5FCS Routing: IP/IPX RAS S/W Version: V1. 50(B. 00) | 8/17/98 ISDN F/W Version: V 07f Country Code: 255 LAN Ethernet Address: 00:a0:c5:40:00:ee IP Address: 204. 237. 202. 151 IP Mask: 255. 255. 255. 192 DHCP: None Menu 24. 1 only displays the dynamic information now. The CLID of the incoming data or voice call will be shown on this menu too. So is WAN IP address. Menu 24. 1 - System Maintenance - Status CHAN Link B1 isp B2 Voice Type 64Kbps 0Kbps TXPkt 28923 15521 11:31:06 WAN B1 IP Addr: 202. 237. 102. 121 B2 IP Addr: B1 CLID: B2 CLID: 12345 RXPkt 25392 13194 Error CLU ALU 0 12% 1% 0 0% 0% Up Time 0:28:24 0:00:00 Total Outcall Time: Ethernet Status: 10M/Half Duplex TX Pkt: 59389 RX Pkt: 126924 Collision: 3 LAN Packet Which Triggered Last Call: (Type: IP) 45 00 00 38 7D 14 00 00 3F 11 C8 0B CA E7 BB 61 9D 16 01 06 00 35 00 35 00 24 39 90 79 65 00 00 00 01 00 00 00 00 00 00 06 64 6F 6D 61 69 6E 03 Press Command: COMMANDS: 1-Drop B1 2-Drop B2 3-Reset Counters 4-Drop All ESC-Exit 5 Bug fixes 1. [. . . ] If the behavior of the Prestige is different for different switch type, we will also mention it in this example. POTS-1 (DN1) xxx0101 Prestige POTS-2 xxx0202 (DN2) Menu 2 - ISDN Setup Switch Type= Northern Tel NI-1 B Channel Usage= Switch/Switch 1st Phone #= xxx0101 SPID #= 408xxx0101 Analog Call= Phone 1 2nd Phone #= xxx0202 SPID #= 408xxx0202 Analog Call= Phone 2 Advanced Setup = No Menu 2. 1 -- ISDN Advanced Setup ISDN Features Access Code: Conference Call= 60 Call Transfer= 61 Call Drop= 62 Call Forwarding= 57 Phone 1 Call Waiting= Enable Phone 2 Call Waiting= Enable Preferred Phone # for 1st Out Data Call= 1st In this example, we will describe Prestige in different states, and then using a table to show some actions happened in that state and what user should hear from the phone set. The actions in the table include Offhook Call to DN1 Call to DN2 : user pickup the phone : incoming voice call to DN1 (Phone 1 ) : incoming voice call to DN2 (Phone 2 ) The responses after the action include: Ring : user can hear phoneset ringing and able to answer the call. Dial tone : user offhook or single flash can hear the dial tone, and able to make an outcall. Busy tone : remote caller hears busy from switch or user picks up the phone and hear busy tone from phone set. [. . . ]