User manual D-LINK DES-3350SR

[. . . ] D-Link TM DES-3350SR Standalone Layer 3 Switch User' Guide s D-Link DES-3350SR Standalone Layer 3 Switch ____________________ Information in this document is subject to change without notice. Reproduction in any manner whatsoever without the written permission of D-Link Computer Corporation is strictly forbidden. Trademarks used in this text: D-Link and the D-Link logo are trademarks of D-Link Computer Corporation; Microsoft and Windows are regist ered trademarks of Microsoft Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. [. . . ] Layer 3 Global Settings window The user may set the following: Parameters DVMRP State Description The user may globally enable or disable the Distance Vector Multicast Routing Protocol (DVMRP) function by using the pull down menu. The user may globally enable or disable the Protocol Independent Multicast Dense Mode (PIM -DM) function by using the pull down menu. The user may globally enable or disable the Routing Information Protocol (RIP) function by using the pull down menu. PIM-DM State RIP State Click Apply to implement changes made. MD5 Key Table Settings The MD5 Key Table Configuration menu allows the entry of a 16 character Message Digest - version 5 (MD5) key which can be used to authenticate every packet exchanged between OSPF routers. It is used as a security mechanism to limit the exchange of network topology information to the OSPF routing domain. To configure an MD5 Key, click the MD5 Key Table Settings on the Layer 3 IP Networking folder. Figure 9 - 5. MD5 Key Setting and Table window The following fields can be set: Parameters Description 90 D-Link DES-3350SR Standalone Layer 3 Switch Key ID Key A number from 1 to 255 used to identify the MD5 Key. A alphanumeric string of between 1 and 16 case-sensitive characters used to generate the Message Digest which is in turn, used to authenticate OSPF packets within the OSPF routing domain. under the Delete heading. Click Apply to enter the new Key ID settings. To delete a Key ID entry, click the corresponding Route Redistribution Settings Route redistribution allows routers on the network, which are running different routing protocols to exchange routing information. This is accomplished by comparing the routes stored in the various routers routing tables and assigning appropriate metrics. This information is then exchanged among the various routers according to the individual routers current routing protocol. The Switch can redistribute routing information between the OSPF and RIP routing protocols to all routers on the network that are running OSPF or RIP. Routing information entered into the Static Routing Table on the local xStack switch is also redistributed. The following table lists the allowed values for the routing metrics and the types (or forms) of the routing information that will be redistributed. Route Source OSPF Metric 0 to 16 Type All Internal External ExtType1 ExtType2 Inter-E1 Inter-E2 RIP Static Local 0 to 16777214 0 to 16777214 0 to 16777214 Type 1 Type 2 Type 1 Type 2 Type 1 Type 2 Entering the Type combination - internal type_1 type_2 is functionally equivalent to all. Entering the combination type_1 type_2 is functionally equivalent to external. Entering the combination internal external is functionally equivalent to all. This window will redistribute routing information between the OSPF and RIP routing protocols to all routers on the network that are running OSPF or RIP. To access the Route Redistribution Settings window, go to Configuration > Layer 3 IP Networking > Route Redistribution Settings: Figure 9 - 6. Route Redistribution Settings and Table window The following parameters may be set or viewed: Parameters Dest Protocol Description Allows for the selection of the protocol for the destination device. Choose between RIP and OSPF. 91 D-Link DES-3350SR Standalone Layer 3 Switch Src Protocol Allows for the selection of the protocol for the source device. Allows for the selection of one of six methods of calculating the metric value. [. . . ] Il pezzo o il prodotto in sostituzione beneficerà della garanzia per il tempo residuo della parte o del prodotto originale. Il prodotto in sostituzione non deve necessariamente essere nuovo o di identica fattura, modello o composizione; D-LINK può a sua discrezione sostituire il prodotto non conforme (o qualsiasi parte di esso) con un prodotto che risulti essere equivalente (o di valore superiore) al prodotto non conforme. 4th Floor, Merit House Edgware Road Colindale Londra NW9 5 AB Regno Unito Telefono: +44-020-8731-5555 Fax: +44-020-8731-5511 www. dlink. co. uk International Offices U. S. A 17595 Mt. 92708 TEL: 714-885-6000 Fax 866-743-4905 URL: www. dlink. com Canada 2180 Winston Park Drive Oakville, Ontario, L6H 5W1 Canada TEL: 1 -905-8295033 FAX: 1 -905-8295 223 URL: www. dlink. ca Europe (U. [. . . ]