User manual D-LINK DES-3226L

[. . . ] D-LinkTM DES-3226L Managed 24-port 10/100Mbps and 2GE ports Layer 2 Ethernet Switch Manual DES-3226L Layer 2 Fast Ethernet Switch User's Guide ____________________ Information in this document is subject to change without notice. Reproduction in any manner whatsoever without the written permission of D-Link Computer Corporation is strictly forbidden. Trademarks used in this text: D-Link and the D-LINK logo are trademarks of D-Link Computer Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. [. . . ] IGMP Snooping allows the Switch to read the Multicast Group IP address and the corresponding MAC address from IGMP packets that pass through the Switch. The ports where the IGMP packets were snooped are displayed, signified with an M. The number of IGMP reports that were snooped is also displayed in the Reports field. Figure 5-35. IGMP Snooping Group Table window Switch History The Web manager allows the Switch's history log, as compiled by the Switch's management agent, to be viewed. 53 DES-3226L Layer 2 Fast Ethernet Switch User's Guide Figure 5-36. Switch History window The Switch can record event information in its own logs, to designated SNMP trap receiving stations, and to the PC connected to the console manager. Clicking Next at the bottom of the window will allow you to display all the switch Trap Logs. The information is described as follows: Parameter Description Sequence Time Log Text A counter incremented whenever an entry to the Switch's history log is made. Displays the time in days, hours, and minutes since the Switch was last restarted. Displays text describing the event that triggered the history log entry. 54 DES-3226L Layer 2 Fast Ethernet Switch User's Guide 802. 1X Auth Diagnostics This is a read-only field is used to display the authenticator diagnostics information on the switch. To view this window, click Basic Setup > Network Monitoring > 802. 1X Diagnostics. Figure 5-37. 802. 1X Auth Diagnostics Table window 802. 1X Auth Statistics This is a read-only field is used to display the authenticator statistics information on the switch. To view this window, click Basic Setup > Network Monitoring > 802. 1X Auth Statistics. Figure 5-38. 802. 1X Auth Statistics Table window 802. 1X Auth Session This is a read-only field is used to display the authenticator statistics information on the switch. To view this window, click Basic Setup > Network Monitoring > 802. 1X Auth Session. 55 DES-3226L Layer 2 Fast Ethernet Switch User's Guide Figure 5-39. 802. 1X Auth Session Statistics window 802. 1X Auth Client This is a read-only field is used to display the RADIUS Auth Client information on the switch. To view this window, click Basic Setup > Network Monitoring > 802. 1X Auth Client. Figure 5-40. RADIUS Auth Client Table window 56 DES-3226L Layer 2 Fast Ethernet Switch User's Guide 802. 1X Accounting Client This is a read-only field is used to display the RADIUS Accounting information on the switch. To view this window, click Basic Setup > Network Monitoring > 802. 1X Accounting Client. Figure 5-41. RADIUS Accounting Client Table window Factory Reset The following window allows you to Reset, Reset Config, or Reset System. If a user does not save the result into NVRAM with the Save Changes function, the switch will recover all the settings the last user configured after the switch is rebooted. Figure 5-42. Factory Reset window Save Changes The DES-3226L has two levels of memory, normal RAM and non-volatile or NV-RAM. To retain any configuration changes permanently, highlight Save Changes on the Basic Setup menu. [. . . ] THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY. Governing Law: This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This Limited Warranty provides specific legal rights and you may also have other rights which vary from state to state. [. . . ]