User manual D-LINK DES-3010FA

[. . . ] Table of Contents D-Link DES-3010FA/GA User Guide Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Using the Installation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Using the Embedded Web Interface User Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Intended Audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 D-Link DES 3010FA/GA Installation Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Device Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Active Server-- Specifies the DNS server that is currently active. Page 130 Configuring IP Information Configuring Domain Name Servers Notes 2. · All DNS servers can be selected by clicking Select All in DNS Server Table. The DNS server is enabled, and the device is updated. To add a new DNS Server: 1. Click Basic Setup > IP Configuration > Domain Name System > DNS Server. The Add DNS Server Page opens: Figure 79: Add DNS Server Page 3. 4. Define the DNS Server, DNS Server Currently Active, and Set DNS Server Active fields. The DNS server is added, and the device is updated. Page 131 D-Link DES-3010FA/GA User Guide Defining DNS Host Mapping The DNS Host Mapping Page provides information for defining default DNS domain names. Click Basic Setup > IP Configuration > Domain Name System > Host Mapping. The DNS Host Mapping Page opens: Figure 80: DNS Host Mapping Page The DNS Host Mapping Page contains the following fields: · · · Host Names -- Displays a user-defined default domain name. When defined, the default domain name is applied to all unqualified host names. The possible field values are: ­ ­ 2. Checked -- Removes the selected DNS host. The Add DNS Host Page opens: Click Page 132 Configuring IP Information Configuring Domain Name Servers Figure 81: Add DNS Host Page 3. The DNS host is added, and the device is updated. Page 133 D-Link DES-3010FA/GA User Guide Section 11. Defining the Forwarding Database Packets addressed to destinations stored in either the Static or Dynamic databases are immediately forwarded to the port. The Dynamic MAC Address Table can be sorted by interface, VLAN, or MAC Address, whereas MAC addresses are dynamically learned as packets from sources that arrive at the device. An address becomes associated with a port by learning the port from the frame's source address, but if a frame that is addressed to a destination MAC address is not associated with a port, that frame is flooded to all relevant VLAN ports. To prevent the bridging table from overflowing, a dynamic MAC address, from which no traffic arrives for a set period, is erased. This section contains information for defining both static and dynamic forwarding database entries, and includes the following topics: · · Defining Static Forwarding Database Entries Defining Dynamic Forwarding Database Entries Page 134 Defining the Forwarding Database Defining Static Forwarding Database Entries Defining Static Forwarding Database Entries The Forwarding Database Static Addresses Page contains parameters for defining the age interval on the device. To prevent static MAC addresses from being deleted when the device is reset, ensure that the port attached to the MAC address is locked. The Forwarding Database Static Addresses Page opens. Figure 82: Forwarding Database Static Addresses Page The Forwarding Database Static Addresses Page contains the following fields: · · · MAC Address -- Displays the MAC address to which the entry refers. Interface -- Displays the interface to which the entry refers: ­ ­ · ­ ­ ­ ­ Port -- The specific port number to which the forwarding database parameters refer. LAG -- The specific LAG number to which the forwarding database parameters refer. The possible field values are: Secure -- The MAC Address is defined for locked ports. [. . . ] Other trademarks or registered trademarks are the property of their respective owners. Copyright Statement: No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc. , as stipulated by the United States Copyright Act of 1976 and any amendments thereto. In a residential environment, this product may cause radio interference, in which case the user may be required to take adequate measures. FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. [. . . ]