User manual D-LINK DAP-3320

[. . . ] Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. 00 Date June 30, 2015 Description • Initial release for revision A1 Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc. [. . . ] Assigned Enter the MAC address of the device requesting association here. MAC Address: Subnet Mask: Define the submask of the IP address specified in the IP Assigned From field. WINS: Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that determines the IP address of a network computer with a dynamically assigned IP address, if applicable. DNS: Enter the Domain Name System (DNS) server address for the wireless network. Name: D-Link DAP-3320 User Manual 62 Section 3 - Configuration Current IP Mapping List This window displays information about the current assigned DHCP dynamic and static IP address pools. This information is available when you enable DHCP server on the AP and assign dynamic and static IP address pools. Current DHCP These are IP address pools the DHCP server has assigned using the dynamic Dynamic Profile: pool setting. Host Name: The host name of a device on the network that is assigned an IP address from the DHCP dynamic pool. Binding MAC The MAC address of a device on the network that is assigned an IP address Address: from the DHCP dynamic pool. Assigned IP The current corresponding DHCP-assigned IP address of the device. Address: Lease Time: The length of time that the dynamic IP address will be valid. Current These are the IP address pools of the DHCP server assigned through the DHCP Static static pool settings. Pools: Host Name: The host name of a device on the network that is assigned an IP address from the DHCP dynamic pool. Binding The MAC address of a device on the network that is within the DHCP static MAC IP address pool. Address: Assigned IP The current corresponding DHCP-assigned static IP address of the device. Control List: MAC Select Accept to accept only those devices with MAC addresses in the Access Address: Control List. MAC Select Reject to reject the devices with MAC addresses on the Access Control Address List. List: Upload ACL Enter each MAC address that you wish to include in your filter list, and click File: Add. You may create an ACL list and upload it to the access point instead of manually entering the information. When disabled, all data from the Ethernet port to to WLAN associated wireless devices will be blocked. Internal The default value is Enable, which allows stations to inter-communicate by Station connecting to a target AP. [. . . ] Protecting Against Electrostatic Discharge Static electricity can harm delicate components inside your system. To prevent static damage, discharge static electricity from your body before you touch any of the electronic components, such as the microprocessor. You can do so by periodically touching an unpainted metal surface on the chassis. You can also take the following steps to help prevent damage from electrostatic discharge (ESD): 1. [. . . ]