User manual D-LINK AIRPLUS G DI-524

[. . . ] Note: Using a power supply with a different voltage rating than the one included with the DI-524 will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller. Ethernet-Based Cable or DSL Modem Computers with Windows, Macintosh, or Linux-based operating systems with an installed Ethernet adapter Internet Explorer Version 6. 11g highperformance, wireless router that supports high-speed wireless networking at home, at work or in public places. [. . . ] Try changing the Channel on your DI-524, and on all the devices in your network to avoid interference. Keep your product away (at least 3-6 feet) from electrical devices that generate Reset the DI-524 to its factory default settings and restore the other devices on Your network to their default settings. After you have tried other methods for troubleshooting your network, you may choose to Reset the DI-524 to the factory default settings. Remember that D-Link AirPro products network together, out of the box, at the factory default settings. Locate the Reset button on the back of the DI-524 Use a paper clip to press the Reset button Hold for about 10 seconds and then release After the DI-524 reboots (this may take a few minutes) Advanced Firewall Features NAT with VPN Passthrough (Network Address Translation) MAC Filtering IP Filtering URL Filtering Domain Blocking Scheduling Wireless Operating Range Indoors ­ up to 328 feet (100 meters) Outdoors ­ up to 984 feet (300 meters) 1), you are not connecting to the Internet or have to be connected to the Internet. the device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. to resolve difficulties accessing a web utility , please follow the steps below. Step 1 Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable or connect to a different port on the device if possible. The following connections require a Crossover Cable: Computer to Computer Computer to Uplink Port Computer to Access Point Computer to Print Server Computer/XBOX/PS2 to DWL-810 Computer/XBOX/PS2 to DWL-900AP+ Uplink Port to Uplink Port (hub/switch) Normal Port to Normal Port (hub/switch) The following connections require a Straight-through Cable: Computer to Residential Gateway/Router Computer to Normal Port (hub/switch) Access Point to Normal Port (hub/switch) Print Server to Normal Port (hub/switch) Uplink Port to Normal Port (hub/switch) Rule of Thumb: "If there is a link light, the cable is right. The two types of cable have different purposes for different LAN configurations. EIA/TIA 568A/568B define the wiring standards and allow for two different wiring color codes as illustrated in the following diagram. *The wires with colored backgrounds may have white stripes and may be denoted that way in diagrams found elsewhere. How to tell straight-through cable from a crossover cable: The main way to tell the difference between the two cable types is to compare the wiring order on the ends of the cable. All you need to remember to properly configure the cables is the pinout order of the two cable ends and the following rules: A straight-through cable has identical ends A crossover cable has different ends It makes no functional difference which standard you follow for straight-through cable ends, as long as both ends are the same. You can start a crossover cable with either standard as long as the other end is the other standard. Using a pattern other than what is specified in the above diagram could cause connection problems. When to use a crossover cable and when to use a straight-through cable: Computer to Computer ­ Crossover Computer to an normal port on a Hub/Switch ­ Straight-through Computer to an uplink port on a Hub/Switch - Crossover Hub/Switch uplink port to another Hub/Switch uplink port ­ Crossover Hub/Switch uplink port to another Hub/Switch normal port - Straight-through 66 Step 2 Disable any Internet security software running on the computer. Check the help files included with your firewall software for more information on disabling or configuring it. From the Security tab, click the button to restore the settings to their defaults. Go to the Advanced tab and click the button to restore these settings to their defaults Click OK. [. . . ] Products sent COD will either be rejected by D-Link or become the property of D-Link. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link, with shipping charges prepaid. Expedited shipping is available if shipping charges are prepaid by the customer and upon request. [. . . ]