User manual CYBEX INTERNATIONAL BRAVO 8810
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CYBEX INTERNATIONAL BRAVO 8810. We hope that this CYBEX INTERNATIONAL BRAVO 8810 user guide will be useful to you.
You may also download the following manuals related to this product:
CYBEX INTERNATIONAL BRAVO 8810 (3268 ko)
Manual abstract: user guide CYBEX INTERNATIONAL BRAVO 8810
Detailed instructions for use are in the User's Guide.
[. . . ] Part Number 8800-888-4 A
BravoTM 8800/8810 Owner's Manual Strength Systems
www. cybexintl. com
Table of Contents
Safety
Safety Guidelines And Practices . .
14 17 19 20 21
Cybex® and the Cybex logo are registered trademarks of Cybex International, Inc. Bravo® and its mark are registered trademarks of Cybex International, Inc. DISCLAIMER: Cybex International, Inc. , makes no representations or warranties regarding the contents of this manual. [. . . ] Display the Facility Safety Sign so it is visible and prominent.
Securing Equipment
Do not use machine until it is properly anchored. The machine has holes in the feet, which allow for ease in anchoring to the floor. Equipment must be secured to a solid, level surface to eliminate rocking, tipping, or falling over due to incorrect usage and misuse. The solid, level surface should not deviate more than 1/8" over a 10' distance or as defined and required by local building and architectural codes. Anchoring of equipment must be completed by a qualified licensed contractor. Due to the wide variation of flooring on which machines may be anchored or installed, verify anchoring method and anchoring fasteners with a qualified and licensed contractor. A minimum pull out force of 220 lbs/100 kgs is required for each anchor position. PROPER USAGE Use equipment only as described in the manual or on the placards located on each machine. STANDARD COMPLIANCE Cybex products meets applicable ASTM and EN Standards.
6
Cybex Bravo 8800/8810 Owner's Manual
Regular Maintenance Activities
Preventative maintenance activities must be performed to maintain normal and safe operation of your equipment. Keeping a log sheet of all maintenance actions will assist you in staying current with all preventative maintenance activities. The preventative maintenance actions are described in detail in the maintenance section of this manual. Weekly
· · · · · ·
Inspect all nuts and bolts for looseness. If a cable or belt is worn or damaged, immediately discontinue use until cable or belt has been replaced. Lubricate guide rods using automotive engine oil only.
Yearly Replace all cables and belts at least annually.
7
Cybex Bravo 8800/8810 Owner's Manual
Warnings and Cautions
Warning decals indicate a potentially hazardous situation that could result in death or serious injury if the precautions are not observed. Caution decals indicate a potentially hazardous situation, which, if not avoided, could result in minor or moderate injury. The diagram following the decals show where each decal is located.
D WITH OLD TEXT.
12 PT ARIAL FONT
R . 25 4 PLACES
2. Read and understand warning labels and user manual prior to exercising. Obtain instruction prior to use.
WARNING
SERIOUS INJURY COULD OCCUR IF THESE PRECAUTIONS ARE NOT OBSERVED
8. 25 PT ARIAL FONT
3. Equipment may only be used under supervision of an authorized trainer. The machine is not intended for any exercises other than the ones shown in the short instruction decal on the machine. Contraindications: The following conditions must be cleared by a physician beforehand: fractures, recent operations, severe osteoporosis with less than 80% bone density, acute herniated disc with surgical indication, tumors and severe circulatory or vascular illnesses and pulmonary functional disruptions, asthma, severe diabetes, pregnancy shortly before delivery, detached retina. Equipment without motion limiters may only be used by patients capable of full range of motion. [. . . ] AVOID acid or chlorine based cleaners and also cleaners containing abrasives as these could scratch or damage the equipment. Clean Chrome Clean chrome tubes, first using chrome polish and then using a car wax seal. AVOID acid or chlorine based cleaners and also cleaners containing abrasives as these could scratch or damage the equipment. Guidelines for cleaning front panel: Use clean soft cloths or sponges for application of cleaners and again for washing and rinsing. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CYBEX INTERNATIONAL BRAVO 8810
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CYBEX INTERNATIONAL BRAVO 8810 will begin.