Detailed instructions for use are in the User's Guide.
[. . . ] Part Number 18020-999-4
Cybex Bravo Pull Owner's Manual Strength Systems
www. cybexintl. com
Table of Contents
Safety
Safety Guidelines And Practices . .
27 27 28 29 29
Cybex® and the Cybex logo are registered trademarks of Cybex International, Inc. DISCLAIMER: Cybex International, Inc. , makes no representations or warranties regarding the contents of this manual. We reserve the right to revise this document at any time or to make changes to the product described within it without notice or obligation to notify any person of such revisions or changes. [. . . ] Do not install, use, or store the unit in an area of high humidity, such as near a steam room, sauna, indoor pool or outdoors. Extensive exposure to water vapor, chlorine and/or bromine could adversely affect the equipment.
10
Cybex 18020 Bravo Pull Owner's Manual
Assembly Procedure
Two people will be required for this procedure. Read and understand all instructions thoroughly before assembling this unit. If there is damage, see the Customer Service section of this manual for proper procedure to return, replace, or reorder parts. Qty 4 Part Number 16010-311 Description Foot pad Diagram
2
4800-557
Decal (10-150)
4
GQ000206
Link
4
8800-008
Handle Assembly
1 Placement If 18020canfit through doorway
51122
Strap
Then Two people will be required for this procedure 1. Attach foot pads to each foot of frame.
11
Cybex 18020 Bravo Pull Owner's Manual
If
Then Two people will be required for this procedure 1. Remove back panels from machine.
18020cannotfit through doorway
4. Remove spiral pin connecting pulley using a hammer and a 3/16" pin punch.
Spiral pin
6. Guide rod cap contains a compression spring that will fly if grasp is not released slowly. Slide spring loaded guide rod cap down guide rod until cap is clear of frame. Slowly release grasp of guide rod cap and remove.
12
Cybex 18020 Bravo Pull Owner's Manual
If 8. Remove button head socket cap screw (BHSCS) and locknut to remove cable pulley using a 7/32" Allen wrench and 9/16" wrench. Cable Pulley Cable Pulley
BHSCS BHSCS 18020cannotfit through doorway
2. Remove BHSCS and locknuts securing one side of top front cross bar and top rear cross tube using a 7/32" Allen wrench and 9/16" wrench. Top Front Cross Tube BHSCS Qty 4 Top Rear Cross Tube
BHSCS Qty 4
13
Cybex 18020 Bravo Pull Owner's Manual
If
Then 2. Remove the button head socket cap screw (BHSCS) securing adjustable post to frame using a 7/32" Allen wrench. Remove BHSCS and locknuts securing mounting tube to frame using a 7/32" Allen wrench and 9/16" wrench.
Mounting Tube
BHSCS Qty 2
4. Reattach frame halves and securely tighten the BHSCS and locknuts.
14
Cybex 18020 Bravo Pull Owner's Manual
Securelyanchormachinetothefloor To maximize stability, equipment must be secured to a solid level surface.
· · ·
Cybex is not responsible for the actual anchoring of equipment. If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any leg or framenotincontactwithsurfaceusingflatwashers.
Install individual weight plates one at at time 1. Position each weight plate so wide edges of bushings face upward and narrow edges of bushings face downward.
R COR
ECT
WRO
NG
Wide bushing edge faces upward 2. Reinstall removed pulleys.
The narrow bushing edge must face downward.
2. [. . . ] To speak with a customer service representative, call 888-462-9239 (for customers living within the USA) or 508-533-4300 (for customers outside the USA). The following information located on the serial number decal will assist our Cybex representatives in serving you.
·
Unit Serial Number, Product Name and Model Number
This product may be produced under one or more of the following patents
Made in U. S. A. MODEL# 8810-90 SERIAL# XXXXXXXXXXXXX
1 9 7 5 2 4 th Av e S W O w a to n n a , MN . 5 5 0 6 0 1-888-462-9239
5, 628, 715 5, 722, 921 6, 743, 158 7, 338, 415 D481, 428 D490, 128 D491, 238 7, 727, 128
5, 643, 152 5, 620, 402 7, 179, 209 7, 503, 882 D486, 535 D490, 865 D497, 190 7, 717, 831
5, 616, 107 6, 488, 612 7, 335, 139 D480, 773 D490, 127 D491, 237 6, 033, 350
· · · ·
Part Description and Part Number if you have it. [. . . ]