User manual CRESTON TPMC-9 10-10
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CRESTON TPMC-9. We hope that this CRESTON TPMC-9 user guide will be useful to you.
Manual abstract: user guide CRESTON TPMC-910-10
Detailed instructions for use are in the User's Guide.
[. . . ] Crestron TPMC-9 IsysTM 9" Tilt Touchpanel Operations Guide
This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON
Regulatory Compliance
As of the date of manufacture, the TPMC-9 has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling.
Federal Communications Commission (FCC) Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. [. . . ] Each TPMC-9 is assigned a different Net ID or IP ID number as it is added. If necessary, double click a device to open the "Device Settings" window and change the Net ID or IP ID, as shown in the following illustrations.
"Device Settings: Crestron TPMC-9 (Cresnet)" Window
26 · IsysTM 9" Tilt Touchpanel: TPMC-9
Operations Guide DOC. 6965A
Crestron TPMC-9
IsysTM 9" Tilt Touchpanel
"Device Settings: Crestron TPMC-9 (Ethernet)" Window
NOTE: The ID code specified in the SIMPL Windows program must match the Net ID or IP ID of each unit. Program Manager Program Manager is the view where programmers "program" a Crestron control system by assigning signals to symbols. The symbol can be viewed by double clicking on the icon or dragging it into Detail View. Each signal in the symbol is described in the SIMPL Windows help file (F1).
Programming with VisionTools
Touchpanel screens should be created in Crestron VisionTools® (VT Pro-e®) to allow accessing the embedded applications, switching of source signals to desired outputs as well as selection of the system mode. There are no special programming requirements to use the functions of the TPMC-9 in a room-control system.
Multi-Mode Objects
Multi-mode objects offer highperformance programming!
The single most-advanced VT Pro-e high-performance programming technique involving the TPMC-9 is the concept of multi-mode objects. button, legend, etc. ) is an object drawn on a VT Pro-e page that can have one or more active and inactive visible settings (modes). For examples, refer to www. crestron. com/exampleprograms and search for multimode object examples. This file contains the VT Pro-e touchpanel files and SIMPL Windows files that illustrate the high-performance capabilities of multi-mode objects.
WAV File Audio Messages
The TPMC-9 touchpanels are capable of playing audio messages as system prompts and responses. These files are recorded as WAV files on a PC using an audio utility such as Sound Recorder that is packaged with Microsoft Windows 95/98/Me/XP/NT/2000/Vista/7TM. Files from other sources may also be converted to an acceptable format by using this or a similar utility. Many other audio utilities are available commercially or as shareware. The TPMC-9 touchpanels accept the following WAV file formats: PCM, 8 & 16 bit, 8 44. 1 kHz, mono & stereo. For more information about how to use Sound Recorder, refer to its User's Guide and
Operations Guide DOC. 6965A IsysTM 9" Tilt Touchpanel: TPMC-9 · 27
IsysTM 9" Tilt Touchpanel
Crestron TPMC-9
extensive help information provided with the software. Also refer to the help file in VT Pro-e to learn how to use its audio tool, Sound Manager, to attach WAV files to a touchpanel project. Pre-recorded WAV files for voice prompts and responses are available from Crestron. These files can be stored into and programmed for use in the touchpanel directly or may be edited with the Sound Recorder. For example, the individual files can be combined to create custom messages. NOTE: Touchpanel WAV files can be obtained from the Wave LC Library of the Crestron FTP site.
Bit Depth and File Size
A balance of performance and quality can be achieved by using VT Pro-e to configure the size of graphics in a project. Read this section to learn about bit depth and how to maximize the quality and performance of a TPMC-9 project. [. . . ] Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number and return address. Products may be returned for credit, exchange or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CRESTON TPMC-9
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CRESTON TPMC-9 will begin.