User manual BENQ FP781

[. . . ] Benq FP781 LCD Color Monitor 17. 0" (43. 18 cm) LCD Panel Size User's Manual Benq LCD Color Monitor User's Guide Copyright 2002. Benq Corporation (formerly Acer Communications & Multimedia Inc. ). No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of Benq Corporation. Benq Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. [. . . ] The adjustment can be autosaved. Main Menu Mode Control Functions Available in Main Menu Digital mode OSD main menu. Analog mode OSD main menu. English 38 Benq LCD Color Monitor User's Guide Brightness Press "<"or ">" key to select this item and press "Enter" to enter sub-menu. Press "<"or ">" key to adjust brightness and then press "Exit" to return to main menu. Fine Tune Press "<"or ">" key to select this item and press "Enter" to enter sub-menu. There are two items in this sub-menu. Pixel Clock: adjust the frequency of the pixel. English 39 Benq LCD Color Monitor User's Guide Auto Adjust The same function as iKey Position Press "<"or ">" key to select this item and press "Enter" to enter sub-menu. There are two items in this sub-menu. H. (Horizontal) Position: adjust the horizontal position of the display. V. (Vertical) Position: adjust the vertical position of the display. Color Press "<"or ">" key to select this item and press "Enter" to enter sub-menu. English 40 Benq LCD Color Monitor User's Guide There are three preset modes: C1:9300K C2:6500K C3:5800K And one user mode. In user mode, user can adjust Red, Green and Blue color. Languages Press "<"or ">" key to select this item and press "Enter" to enter sub-menu. To select OSD language within 6 languages DE: Deutsch EN: English ES: Español FR: Français IT: Italiano JA: Japanese Recall Press "<"or ">" key to select this item and press "Enter" to enter sub-menu. English 41 Benq LCD Color Monitor User's Guide Press "<"or ">" key to make decision. Select "Yes" and press "Enter" to restore factory settings. Select "No" and press "Enter" or just press "Exit" to return to main menu. Volume Press "<"or ">" key to select this item and press "Enter" to enter sub-menu. Press "<"or ">" key to adjust volume of speaker and then press "Exit" to return to main manu. Input Select Press "<"or ">" key to select this item and press "Enter" to enter sub-menu. Press "<"or ">" key to select between digital and analog signal source. English 42 Benq LCD Color Monitor User's Guide Image Size Press "<"or ">" key to select this item and press "Enter" to enter sub-menu. Press "<"or ">" key to select between "FULL" (full screen) and "1:1" (real size). OSD Setting Press "<"or ">" key to select this item and press "Enter" to enter sub-menu. There are 3 items in this sub-menu. H. (Horizontal) Position: adjust the OSD horizontal position of the display. V. (Vertical) Position: adjust the OSD vertical position of the display. OSD Time: to set the standby time of OSD. English 43 Benq LCD Color Monitor User's Guide Info Press "<"or ">" key to select this item and press "Enter" to enter sub-menu. Press "Enter" to show display information (resolution, horizontal frequency and vertical frequency). Press "Exit" to return to main menu. Contrast Press "<"or ">" key to select this item and press "Enter" to enter sub-menu. Press "<"or ">" key to adjust contrast ratio and then press "Exit" to return to main menu. English 44 Benq LCD Color Monitor User's Guide Troubleshooting Frequently Asked Questions (FAQ) The image is blurred: Read the chapter, Installation/Adjustment and then select the correct resolution, refresh rate and make adjustments based on these instructions. Do you use a VGA extension cable?If not, optimize the image working on the description in the chapter, Installation/Adjustment. It is normal for blurring to occur due to conduction losses in extension cables. You can minimize these losses by using an extension cable with better conduction quality or with a built-in booster. For an optimal picture it is recommended to choose a mode listed in the table. This can occur as a result of a signal frequency from the VGA card, which does not correspond with the usual standard. You can improve this situation by altering an automatic setting or by manually changing the phase setting and the pixel frequency from the "Fine Tune" menu. hIf you switch off the monitor, interference lines can occur on your screen. hTo extend the service life of the product, we recommend that you use your computer's power management function. hNote: The "*" timing is not supported in Digital input (DVI-D). English 47 Benq LCD Color Monitor User's Guide Specifications Model Display type Viewable diagonal Native (maximum) resolution Colors Contrast / Brightness Response time Viewing angle (left/right, up/down) Line frequency Image frequency Image checks 17. 0" , active, TFT 43. 18cm 1, 280X1, 024 16. 7 million 350:1 / 200cd/m² 35ms 80/80, 80/80 31. 47 - 81. 18 kHzMulti- frequency monitor 56. 25 - 75. 0 Hz modes within these parameters Digital, Screen OSD Technology, iKey (automatic image setting) iKey, Input, Exit, "<", ">", Enter Contrast, brightness, vert. image position, phase, pixel clock, color balance, color palette, choice of language, Input Select, Image Size, OSD Setting, Status indicator. VESA DPMS, EPA 50 Watt Max < 3 Watt Analog: RGB analog 0. 7 Vpp/75 Ohm positive Digital: DVI (Digital Visual Interface Standard Rev. 1. 0) compliance Synchronisation Signal connection Temperature (operating) Air humidity (operating) Certifications Operating voltage Dimensions (W x H x D) Weight TTL separate signal connection 15-pin mini D-sub cable Analog: 15 pin mini D-sub cable Digital: 24 pin DVI cable 5 °C - 40 °C 20% - 80% TCO 99 (Optional), TÜV/Ergonomics, TÜV/GS, FCC Class B, ISO 13406-2, VCCI, UL, CE, C-Tick, BSMI Automatic switched mode power supply, 90-264 V, 4763Hz 404. 6 x 449. 6 x 202. 1 mm 4. 7 kg FP781 Controls iScreen functions Power Management max. [. . . ] Brightness is another point, on which LCD monitors are superior to CRT devices. In the case of LC displays, values below 150 cm/m² are not acceptable. English 50 Benq LCD Color Monitor User's Guide Display errors A. Pixel errors Pixel errors are (unfortunately) unavoidable with today's production methods, if you want to manufacture displays at an economically sensible price. A display with a resolution of 1024x768 dots therefore has 786432 pixels. [. . . ]