User manual BENQ FP73G

[. . . ] FP73G LCD Color Monitor 17. 0" LCD Panel Size User's Manual Welcome i Copyright Copyright © 2006 by BenQ Corporation. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation. ii Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of BenQ Corporation to notify any person of such revision or changes. Please follow these safety instructions for best performance, and long life for your monitor iii Power Safety · The AC plug isolates this equipment from the AC supply. · The power supply cord serves as a power disconnect device for pluggable equipment. [. . . ] When complete, the wizard should have found and selected the BenQ driver on the CD appropriate to your monitor model, in this case `BenQ FP73G' in the location `d:\driver\BenQFP73G. inf ' or similar. The drive letter for your CD drive may differ from the example above depending upon your system ­ it may be `D:' or `E:' or `F:' etc. 9. Select (single-click) the file named `BenQ FP73G' on the CD, and click the Next button. This will copy and install the appropriate monitor driver files to your computer. 10. Click Finish. This will close the wizard and return you to the Monitor Properties window, now renamed BenQ FP73G Properties. 11. Click Close, OK, and OK. This will close the Display Properties windows. You do not need to restart Windows XP, as the BenQ LCD monitor drivers will operate immediately with no further action required by you. 16 Getting the most from your BenQ monitor How to install on Windows 2000 system You do not need to follow this instruction if you are installing onto a computer which has a Windows XP (or later) version system. In that case, see the instructions at How to install on Windows XP systems on page 16. 1. Open Display Properties. The quickest shortcut to Display Properties is through the Windows desktop. Alternatively, the Windows menu to Display Properties is located in Control Panel. In Windows 2000 version, Control Panel is located under the Settings menu item. Click the Settings tab and the Advanced button. The Advanced Display Properties window will display. 3. In Windows 2000, click the Monitor tab and the Properties button. The Monitor Properties window will display. 4. In Windows 2000, click the Driver tab and the Update Driver button. The Upgrade Device Driver Wizard will display. See How to complete the Windows Upgrade Device Driver Wizard on page 18. Getting the most from your BenQ monitor 17 How to complete the Windows Upgrade Device Driver Wizard 1. Load the BenQ LCD Monitor CD-ROM which came with your monitor. Insert the CD-ROM into a CD drive on the computer you attached the monitor to. The autorun User's Guide language selection page will display in your web browser. You can select a language and view the online version of this manual from the next window. You could then print it out for reference if you wish to work off-line. When you're ready, Cancel the browser as it is not required for the Windows Upgrade Device Driver Wizard. 2. Check the option `Display a list of known drivers. . . ' and click Next. Click the Have Disk button. The Install From Disk window will display. 5. Click the Browse button and navigate to the BenQ LCD Monitor CD-ROM. This is the CD you loaded in step 1 above. The CD Drive will have a Windows designated drive letter (like D: or E: or F:). Select the drive letter corresponding to the drive you put the CD into. 6. [. . . ] Press the Enter key to recall color settings, or press the Exit key to return to previous menu. or keys to select Recall All. Press the Press the Enter key to recall position and color settings, or press the Exit key to return to previous menu. 30 How to adjust your monitor Miscellaneous sub-menu Input Select: or keys to select D-sub (analog) Press the or DVI (digital) input to activate the new settings. Press the Exit key to return to previous menu. Sharpness: Press the or keys to adjust the degree of Sharpness. Press the Exit key to return to previous menu. Display Information: Select Display Information to display the current monitor property settings. [. . . ]