User manual BENQ DV3750

[. . . ] English DV3750 LCD Display User's Manual Welcome Copyright English Copyright BenQ Corporation. No part of this User's Manual may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation. Dolby, Pro Logic, and the double-D symbol are registered trademarks of Dolby Laboratories. TruSurround XT technology is incorporated under license from SRS Labs, Inc. [. . . ] (Picture mode/Teletext page selection) · Press this button to select from among 6 picture modes. · When Teletext is displayed on the screen, press this button to switch to a specific page. (Audio mode/Teletext page selection) · Press this button to select between Sound 1 (left audio), Sound 2 (right audio) and Stereo. (Not available during TV reception) · When Teletext is displayed on the screen, press this button to switch to a specific page. (Teletext display) Press this button to cycle Teletext display types between Teletext only - mixed display. (Teletext information) Press this button to display some concealed Teletext information. (Enter Teletext subpage) Press this button to enter the subpage of a Teletext menu. Remote Control 13. PIP/PBP Press this button to simultaneously view signals from two different sources on the screen. You may choose picture-inpicture (PIP) mode or picture-by-picture (PBP) mode. · Press OK to execute selections, or to enter a submenu you have selected. / (Freeze) Press this button to freeze the image on the screen (the signal will continue to be broadcast). / (Screen aspect ratio) Press this button to adjust screen image aspect ratio settings. / (Sequential channel selection/Teletext page selection) · Press these buttons to sequencially change channels. · When the TV is off, press these buttons to turn it on and change channels. · When Teletext is displayed on the screen, press these buttons to go to the previous or next page. MENU Press this button to display the OSD (On-Screen Display) menu for adjusting the image, sound and functions. Channel selection · Press these buttons to select the channel you wish to view. · When the TV is off, press a button to turn it on and go to the selected channel. (Channel return) Press this button to toggle between the current and the previous channel you were viewing. Channel entry Press this button before entering double-digit channels. English Remote Control 13 Using the Remote Control When using the remote control, aim it at the remote control sensor window on the display. If there is an object between the remote control and the signal remote control sensor window on the display, the remote may not operate. When using the remote control, please note: · Do not strike or drop the remote. Do not expose the remote control to liquids and do not place it in humid environments. · Do not install or place the remote control in direct sunlight. [. . . ] and there is a loss of definition · The DVD player is set for a high-level output. in the brightest areas of the · The AV video signal has not been terminated properly image. The image appears too 'washed · Reduce the brightness level till the black areas of the picture out', or the darkest areas of the appear as black. Power indicator lamp flashes · This indicates the PC/DVI input has been selected with no red. [. . . ]