User manual BENQ DV2050

[. . . ] DV2050 20" LCD TV User's Manual Welcome Copyright Copyright BenQ Corporation. No part of this User's Manual may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation. Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents of this User's Manual. BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents thereof without obligation to notify any person of such revision or changes. FCC Statement FCC Notice LCD TV DV2050: A CLASS B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. [. . . ] Connect to the Component video input (Y Cb Cr) for standard DVD players. Your BenQ TV supports 480p, 720p and 1080i HDTV signals. 8 Setting up Your TV Connecting Audio Output Signals DV2050 provides extra audio output terminals for delivering TV audio signal to an amplifier or other audio devices. Connect the AUDIO OUT L/R terminals on the TV to the signal input terminals of an amplifier or other audio devices using the AV cable. Setting up Your TV 9 Remote Control 1. INFO Press this button to display the TV channel message and any signal message (including video or computer signals). ASPECT Press this button to adjust screen image aspect ratio. POWER INFO ASPECT PIP/PBP 4. TV/CATV Press this button to select TV or cable system mode. BACKLIGHT PRESET SLEEP FREEZE PIP AUDIO CH+/- 5. NOT SUPPORTED will appear on the screen if this button is pressed) PENTER MUTE VOL 8. SLEEP Press this button to set the automatic shut-off timer. CH MTS 9. NOT SUPPORTED will appear on the screen if this button is pressed) RTN 11. NOT SUPPORTED will appear on the screen if this button is pressed) 13. MENU Press this button to display the OSD (on-screen display) menu for adjusting the image, sound and functions. The function table allows you to use the $ or #buttons to select items. INPUT Press this button to select an input source. 10 Remote Control 15. Press ENTER to execute selections, or to enter a submenu you have selected. FAVORITE Press this button to jump to the five favorite channels you have set. EXIT When operating the on-screen display, press this button to return to the next higher menu level. Press these buttons to raise or lower the volume. PENTER POWER INFO ASPECT PIP/PBP SLEEP FREEZE BACKLIGHT PIP AUDIO CH+/- PRESET 20. MTS Press this button to select various audio systems (different TV systems have different selections). Channel select Press these buttons to select the channel you wish to view. RTN Press this button to toggle between two channels. MTS RTN Remote Control 11 Using the Remote Control When using the remote control, aim it at the remote control sensor window on the TV. If there is an object between the remote control and the signal remote control sensor window on the TV, the remote may not operate. When using the remote control, please note: · Do not strike or drop the remote. Do not expose the remote control to liquids and do not place it in humid environments. [. . . ] The image appears distorted Ensure that the TV's aspect ratio is properly set. Ensure that the cables are properly connected between the The image is purple video source equipment and the TV. The image appears too bright, and there is a loss of definition · The DVD player is set for a high-level output. in the brightest areas of the · The video signal has not been terminated properly image. [. . . ]