User manual BENQ DS660
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BENQ DS660. We hope that this BENQ DS660 user guide will be useful to you.
You may also download the following manuals related to this product:
BENQ DS660 (1334 ko)
BENQ DS660 annexe 1 (1057 ko)
Manual abstract: user guide BENQ DS660
Detailed instructions for use are in the User's Guide.
[. . . ] Please use suitable equipment for mounting the unit and ensure it is securely installed.
3. 6.
Caution
· · · Always open the lens shutter or remove the lens cap when the projector lamp is on. This projector is designed to operate safely within a bandwidth of 110 to 240 volts, but could fail if power cuts or surges of more than10 volts occur. In these high-risk areas, it is recommended that a power stabilizer unit be used in conjuction with this projector.
Save this user's guide: The information contained in this manual will assist you in operating and maintaining your personal projector. [. . . ] Press Exit again to leave the menu system.
9
Introduction
5
BenQ DX/S660 DX/S650 User's Guide
Adjuster
The projector is equipped with 2 quick-release adjuster feet. Lift the projector up and press the adjuster button to release the adjuster. The adjuster will drop into position and be locked.
Projector Features
The projector integrates high-performance optical engine projection and a userfriendly design to deliver high reliability and ease of use. There may be danger of an explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions.
8
Introduction
BenQ DX/S660 DX/S650 User's Guide
INSTALLATION
Screen Size
Place the projector at the required distance from the screen according to the desired picture size (see the table below).
L Projection Distance
Diagonal 30. 4 60. 8 91. 2 121. 5 151. 9 182. 3 213. 1 243. 1 273. 5 303. 9 Screen Size (Max. ) A. Height (cm) 61. 8 46. 3 123. 65 92. 7 185. 3 138. 9 247. 0 185. 2 308. 7 231. 6 370. 5 277. 9 432. 2 324. 18 494. 0 370. 5 555. 7 416. 7 617. 5 463. 11 L. Projection distance (cm) 100 200 300 400 500 600 700 800 900 1000 Screen Size (Min. ) B. Height (cm) 50. 7 38. 0 101. 3 76. 0 151. 9 113. 9 202. 5 151. 9 253. 2 189. 9 303. 8 227. 9 354. 4 266. 2 405. 1 303. 8 455. 7 341. 8 506. 3 379. 8
Connecting to Various Equipment
HDTV description
The projector is capable of displaying various High Definition TV display modes. Some of these sources are: · · Digital-VHS (D-VHS) player Satellite Dish HDTV receiver · · DVD player DTV tuners
Most of these sources will provide an analog component video output, a standard VGA output, or a YPBPR (default) format. The projector is capable of accepting HDTV data through a YPBPR connector. Control Menu
FUNCTION DESCRIPTION Language sets the language for the OSD control menus. Use the 3 / 4 key to select the desired language from among English, French, German, Italian, Spanish, Korean, Simplified Chinese and Traditional Chinese. OSD OSD Time Sets the length of time the OSD will remain active after the last time you pressed the button. Keystone hold When selected, preserves the last keystone correction value even when the projector is restarted. Mirror hold When selected, preserves the last mirror correction value even when the projector is restarted. Setup Blank time Determines the length of time before the projector is shut off when Blank is activated. Auto Off Sets the length of time before the system is shut off when no input is detected. User logo Enables the user to define his/her own logo screen that will display during strat-up. Three modes are available: Default (BENQ logo), black screen and blue screen. Default Video Mode Lamp hour Returns all settings to their factory preset values. Shows lamp usage time.
Language
Operation
17
BenQ DX/S660 DX/S650 User's Guide
5. [. . . ] Press or to reset lamp hours or press EXIT to leave.
Temp Information
When the LED lights up, it is warning you of the following possible problems: 1. Turn off the projector and contact qualified service personnel for further help.
22
Maintenance
BenQ DX/S660 DX/S650 User's Guide
Service Information
Accessories (included in the Standard Package)
Description . 22. 91007. 001
Optional Accessories (not included in the Standard Package)
Description of parts . 60. J3004. 001
Ordering Parts or Getting Information
For product information, product assistance, service information, or to order accessories, please see the BENQ corporation website at http://www. BenQ. com.
Maintenance
23
BenQ DX/S660 DX/S650 User's Guide
TROUBLESHOOTING
Common Problems & Solutions
PROBLEMS · · NO POWER · · · · · · · · · · · · · · · · · · TRY THESE SOLUTIONS Make sure the power cord is inserted snuged into the AC adapter socket. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BENQ DS660
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BENQ DS660 will begin.