User manual BENQ DS650
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BENQ DS650. We hope that this BENQ DS650 user guide will be useful to you.
You may also download the following manuals related to this product:
BENQ DS650 (1334 ko)
Manual abstract: user guide BENQ DS650
Detailed instructions for use are in the User's Guide.
[. . . ] DX/S660 BenQ DX/S650 User's Guide
Copyright
Copyright © 2002 by BENQ Corporation (formerly Acer Communications & Multimedia Inc. ). No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BENQ Corporation.
Disclaimer
BENQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Furthermore, BENQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of BENQ Corporation to notify any person of such revision or changes.
Fill this in!!
In case service is needed in the future, record the information described below. Projector Information Product Name: Serial Number: Date of Purchase: Dealer Information Dealer: Telephone Number: Address: DX/S660 DX/S650
BenQ DX/S660 DX/S650 User's Guide
Table of Contents
Introduction . [. . . ] Some of these sources are: · · Digital-VHS (D-VHS) player Satellite Dish HDTV receiver · · DVD player DTV tuners
Most of these sources will provide an analog component video output, a standard VGA output, or a YPBPR (default) format. The projector is capable of accepting HDTV data through a YPBPR connector. Use a HDTV cable that came with your projector to display HDTV images. The following standards are supported in the HDTV function: · · 480i 720p · · 480p 1080i
Please refer to "Menu System" on page 13 for information on the HDTV OSD selections. Installation 9
BenQ DX/S660 DX/S650 User's Guide
Connecting to Various Equipment
It only takes a few seconds to connect your projector to your desktop or notebook computer, VCR, or other systems. However, a Mac adapter (an optional accessory) is needed for connection to Macintosh computers.
Monitor
RGB
PC Audio
PC/Notebook
USB
To RGB Input
To RGB output
RGB IN
RGB OUT
PC Audio
DVD Player Y Pb Pr
Pr
Pb
Y
AUDIO IN
VIDEO
L
R USB
Video / Audio
USB
S-VIDEO
CONTROL
Control S-Video
VIDEO
AUDIO S-VIDEO L R
10
Installation
BenQ DX/S660 DX/S650 User's Guide
OPERATION
Start Up
1. Plug the power cord into a wall socket.
2.
Turn on the main power switch.
3.
Press POWER to start the unit. The back-lit POWER key flashes green and stays green when the power is turned on.
Projector Remote Control
(When the power is turned off, there is a 60-second cooling period before the projector can be re-started. ) 4. Switch on all connected equipment.
Operation
11
BenQ DX/S660 DX/S650 User's Guide
Digital Keystone Correction
Keystoning refers to the situation where the projected image is noticeably wider at either the top or bottom. To correct this, press KEYSTONE +/- (hot key) on the control panel of the projector or on the remote control, and then adjust the sliding bar labeled Keystone, as needed. Press - to correct keystoning at the bottom of the image.
Projector
Remote control
Auto Adjustment
In some cases, you may need to optimize the picture quality. To do this, press the AUTO key on the control panel of the projector or on the remote control. Within 3 seconds, the built-in Intelligent Auto Adjustment function will re-adjust settings to provide the best picture quality.
Projector Remote control
Auto
Source
Au
to
12
Operation
BenQ DX/S660 DX/S650 User's Guide
Source Selection
When several input sources are available, press the SOURCE key to make a selection from the control panel of the projector or the remote control.
Projector Remote control
Source
Auto
Source
Menu System
Press Menu for the main menu, and then press 3or Menu again to select items in the sub-menu.
4 to select a sub-menu. Press
Menu Bar
Sub-menu
Display Keystone Brightness Contrast Phase H. Size
Image Ratio H-position V-position Color Temp Information Ratio H-position V-position Color Tint Color Temp Ratio System Sharpness Color Temp Information
Source Mirror Source Volume Treble Bass Mute
Control Langauge OSD Setup Default Video Mode Lamp hour
PIP Main page: PIP Source PIP Size PIP Pos. Position V. Position More Options Sub Page: Brightness Contrast Color Tint Sharpness System
PC
Y/Pb/Pr
Video
Keystone Brightness Contrast Color Tint
Operation
13
BenQ DX/S660 DX/S650 User's Guide
1. Display Menu
FUNCTION DESCRIPTION Corrects any keystoning of the image. Keystone
-
Adjusts the brightness of the image.
Brightness
Adjusts the degree of difference between dark and light in the image.
Contrast
Adjusts to avoid the occurrence of flicker.
Phase
*This function is not available when the input mode is Video or SVideo.
Adjusts to fit in the desired image size. H. Size
*This function is not available when the input mode is Video or SVideo.
Color Tint
Increases or decreases the color range (R, G, B) of the image.
*This function is not available when the input mode is PC.
Adjusts the image to make it appear more red or blue.
*This function is not available when the input mode is PC.
14
Operation
BenQ DX/S660 DX/S650 User's Guide
2. Image Menu
FUNCTION Ratio DESCRIPTION Users have 3 options for the image ratio. 16:9 Adjusts the horizontal position of the projected image.
H-position
Adjusts the vertical positon of the projected image.
V-position
Color Temp. [. . . ] If the LED light is off, the operation and temperature of the projector's lamp are normal.
Caution
The LAMP indicator will light up if the lamp becomes too hot. If the LAMP indicator is still red when turning the power on, please contact your dealer.
20
Maintenance
BenQ DX/S660 DX/S650 User's Guide
Lamp Replacement
Caution
To reduce the risk of electrical shock, always turn off the projector and disconnect the power cord before changing the lamp. If the lamp is hot, avoid burns by waiting 45 minutes until the lamp has cooled. (It is strongly recommended that you use a magnetichead screwdriver. ) Pull the handle to remove the lamp housing. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BENQ DS650
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BENQ DS650 will begin.