User manual BENQ DC 1016

[. . . ] · To prevent electrical shock, do not attempt to disassemble or repair your camera by yourself. · Do not use your camera outdoors when it is raining or snowing. · If the foreign substance or water gets in your camera, please tum the power off immediately and remove the battery. [. . . ] The LED indicator will be on and a short beep sound emits at each click of the shutter to confirm that a shot has been taken and the camera is ready to take the next picture. Using the Camera Other Modes of Operation Shooting Mode This mode of operation allows you to take lower-resolution images. To set your camera into Shooting mode: Repeatedly press the Function Mode button until the " " icon is displayed on the LCD Display Panel. This indicates that the Shooting mode is ready and also shows the number of pictures you can take is between 100 and 199. Shooting mode is ready only when the LCD Panel displays the " " icon. Repeatedly press this Function Mode button until the " In the shooting mode, the " between 0 and 99. The " " icon is displayed. " icon means the number of pictures you can take is " icon means the number of pictures you can take is between 100 and 199. The " " icon means the number of pictures you can take is between 200 and 299. For examples, the " " icon means the number of pictures you can take is between 800 Using the Camera and 899. The " " icon means the number of pictures you can take is between 900 " icon means the number of pictures you can and 999. But please note that the " take is larger than 1000. Please note that if the " " icon appears, it means some "unknown errors" cause the camera unable to function nomally. There are two ways to solve this problem, you can press "Power" button to pass (ignore) it or you can also press "Shutter" button to format your camera memory. Using the Camera Self-Timer Mode The Self-Timer mode of operation allows a 10 seconds shutter release delay after pressing the Shutter button. Self-Timer mode is ON when this LCD Panel displays the " " icon. Press the Shutter button to start the delay countdown. Repeatedly press this Function Mode button until the Self-Timer mode icon is displayed. Force Power Off The camera will turn off its power when it is not in use within around 105 seconds. However, you can also turn off the power on your own. Long press this Function Mode button, the camera beeps and the power off icon displayed. is Using the Camera Managing Pictures in Camera Erasing the Last One Image from Camera Whenever you wish to discard the images you have already taken, you can erase them from the camera. [. . . ] Before you can use the pictures in camera, you need to connect the camera to your PC. Refer to the graphic 1on page 12 to insert one end of the USB cable into the camera's USB port, and the other end to the USB port of your PC. Or, you can insert the digital camera directly into the USB port of your PC. [. . . ]