User manual AKG PSU 10

[. . . ] If any solid object or liquid penetrates into the equipment, shut down the sound system immediately. Disconnect the power cable from the power outlet immediately and have the equipment checked by AKG service personnel. If you will not use the equipment for a long period of time, disconnect the power cable from the power outlet. [. . . ] If you will not use the equipment for a long period of time, disconnect the power cable from the power outlet. Please note that the equipment will not be fully isolated from power when you set the on/off switch to OFF. Do not place the equipment near heat sources such as radiators, heating ducts, or amplifiers, etc. And do not expose it to direct sunlight, excessive dust, moisture, rain, mechanical vibrations, or shock. To avoid hum or interference, route all cables away from high-voltage lines of any type. Be sure to disconnect the power cable from the power outlet before cleaning the equipment!Never use caustic or scouring cleaners or cleaning agents containing alcohol or solvents since these may damage the enamel and plastic parts. Do not use the equipment for any applications other than those described in this manual. Make sure the total current consumption of all components connected to DC OUT 1 does not exceed 2. 5 A and the total current consumption of all components connected to DC OUT 2 or DC OUT 3 does not exceed 2 A. Do not connect the unit to power before you have made all audio and DC connections. Operating components on an incorrect voltage may damage both the compponents and the PSU 10. The PSU 10 features a wide-range power transformer for primary voltages from 90 VAC to 264 VAC. Therefore, you can connect the unit to any power outlet with an AC voltage within this range and a frequency between 47 Hz and 63 Hz. Use the supplied power cable to connect the PSU 10 to a convenient power outlet. To avoid the risk of electric shock, make sure to connect the equipment to a grounded power outlet. [. . . ] Use the supplied power cable to connect the PSU 10 to a convenient power outlet. To avoid the risk of electric shock, make sure to connect the equipment to a grounded power outlet. The power LEDs (if any) on the components connected to the PSU 10 will light if the components are on. [. . . ]