User manual AKG C 555 L

[. . . ] Please make sure that the piece of equipment your microphone will be connected to fulfills the safety regulations in force in your country and is fitted with a ground lead. [. . . ] Plug the mini XLR connector on the microphone cable all the way into one of the two mini XLR sockets on the B 29 L, the mini XLR socket on the connecting cable of the MPA V L, or the input jack on your bodypack transmitter. To disconnect the cable, press the unlocking button on the mini XLR connector (1) and pull the connector (1) out of the socket. MPA V L: Connect the MPA V L to a balanced XLR microphone input with phantom power and switch the phantom power on. Pull the microphone arm holder (2) with the microphone arm (3) from the temple piece (1) in the direction of the arrow. Insert the microphone arm holder (2) and the cover (4) all the way into the respective wire loop below the opposite temple piece (1). (The cover (4) stabilizes the temple piece and prevents your hair from getting caught in the wire loop. Should the microphone fit loosely, you may bend the behind-the-neck headband and the temple pieces inward: If it does not, bend the wire some more, again with extreme care. If you bend the wire too hard it may be extremely difficult to bend the wire back to the desired shape. [. . . ] To order a free copy of the Declaration of Conformity, visit http://www. [. . . ]