User manual AKG C 518 M

[. . . ] Please make sure that the piece of equipment your microphone will be connected to fulfills the safety regulations in force in your country and is fitted with a ground lead. C 518 ML: B 29 L battery power supply 1 Cardioid microphone for high gain before feedback. [. . . ] (Refer to the instruction manual of the unit to which you connected your microphone. Use the supplied connecting cable to connect the output socket (4) on the gooseneck to one of the two mini XLR sockets on the B 29 L or the mini XLR socket on the connecting cable of the MPA V L. To disconnect the cable, press the unlocking button on the mini XLR connector (1) and pull the connector (1) out of the socket. MPA V L: Connect the MPA V L to a balanced XLR microphone input with phantom power and switch the phantom power on. You can attach the bodypack transmitter to your belt or to the instrument. Reinsert the ends of the fixing clip (1) into the openings in the adapter. To get a tight, punchy sound, aim the microphone at the perimeter of the skin. â· To get a rounder, more open sound, aim the microphone at the center of the skin. â· To get a very dry sound, you can tape a strip of felt or a piece of tissue paper to the skin in an off-center position. â· When miking up small-diameter drums, we recommend aiming the microphone at the perimeter of the top skin to keep the microphone clear of the sticks. [. . . ] SPL for 1%/3% THD: Equivalent noise level: Power requirement: pre-polarized condenser microphone cardioid 60 Hz to 20, 000 Hz 5 mV/Pa (-46 dBV re 1 V/Pa) 200 ohms 2000 ohms 130/132 dB SPL 31 dB(A) to DIN 45412 B 29 L battery power supply, MPA V L phantom adapter, AKG WMS bodypack transmitters Cable length / Connector: 1. To order a free copy of the Declaration of Conformity, visit http://www. [. . . ]