User manual AKG C 477

[. . . ] 1 Safety Please make sure that the piece of equipment your microphone will be connected to fulfills the safety regulations in force in your country and is fitted with a ground lead. Be sure to dispose of used batteries as required by local waste disposal rules. When scrapping the equipment, remove the batteries, separate the case, circuit boards, and cables, and dispose of all components in accordance with local waste disposal rules. [. . . ] This barrier prevents the microphone sound entries from being clogged by perspiration or makeup which would make the sound dull and reduce the sensitivity of the microphone. You can connect the C 477 WR L directly to any bodypack transmitter from AKG. Alternatively, you can use the MPA III phantom power adapter from AKG and a microphone cable to connect the microphone to a mixer or amplifier input. Plug the mini XLR connector on the cable of your microphone all the way into the audio input connector on the bodypack transmitter. Using the microphone with a bodypack from a different manufacturer may cause malfunction or damage to the microphone which may not be covered by the warranty. The optional MPA III phantom power adapter lets you connect the microphone to any phantom power source or XLR inputs with 9 to 52 V phantom power. We recommend the optional N 62 E or N 66 E AC power supply or B 18 battery supply (also optional) from AKG for powering the MPA III. Plug the mini XLR connector on the cable of your microphone all the way into the mini XLR connector on the MPA III connecting cable. 2 C 477 WR oc Using any power supply other than those recommended by AKG may damage your microphone and will void the warranty. You can use this microphone with bodypack transmitters or other devices that provide a supply voltage between 1. For details on the type of connector you will need, refer to the instruction manual of the device to which you want to connect your microphone. The clear-plastic moisture shield on the microphone prevents perspiration or makeup from clogging the sound entry ports and thus changing the sound and reducing the microphone's sensitivity. Therefore, never try to remove the moisture shield from the microphone!If you bend the tubing too sharply it may break, which will void the warranty. Bend the microphone arm so that the microphone will sit in front of the corner of the user's mouth, as close as possible to the mouth. In order to adjust the headband to the user's head, you can bend the metal parts to shape (white arrows) and slide the side piece WITHOUT the microphone arm in and out within the plastic center piece (black arrows). [. . . ] <0, 6 mA Versions L : type mini-XLR, 3 points Versions oc : extrémités de câble libres (galvanisé) Version SH/P: connecteur Lemo 1, 5 m noir mat Versions P : arceau métallique : couleur chair, mat partie en plastique : noire, mate câble : noir mat 180 x 130 x 85 mm 15 g/325 g Consumo de corriente: <0, 6 mA Enchufe de conexión: modelos L: clavija mini XLR de tres polos modelos oc: cable con terminales descubiertas (estañadas) modelo SH/P: conector Lemo Largo del cable: 1, 5 m Superficie: negro mate modelos P: arco de metal: de color piel, mate material sintético: negro mate cable: negro mate Medidas (L x F x Al): aprox. Para limpar as superfícies de material sintético use um pano mole molhado em água (nunca use benzina ou solventes). 000 1, 5 V CC a 12 V CC <0, 6 mA versões L: plugue mini XLR com 3 pólos versões oc: extremidades libres (estanhadas) versão SH/P: conetor Lemo 1, 5 m preta mate versões P: arco de metal: cor da pele, mate material sintético: preto mate cabo: preto mate aprox. [. . . ]