User manual AKG BALANCE K 216 AFC

[. . . ] Do not place the equipment near heat sources such as radiators, heating ducts, or amplifiers, etc. And do not expose it to direct sunlight, excessive dust, moisture, rain, mechanical vibrations, or shock. Be sure to disconnect the AC adapter from the power outlet before cleaning the equipment!Never use caustic or scouring cleaners or cleaning agents containing alcohol or solvents since these may damage the enamel and plastic parts. [. . . ] Due to physical effects that are not related to the quality of the product, devices emitting very high interference radiation may, however, affect the signal received by the headphones. To ensure the best possible reception, do not place your T 216 AFC transmitter near radio equipment, mobile phones, or directly above the picture tube of a TV set or computer monitor. T 216 AFC transmitter K 216 AFC headphones w/battery pack AC adapter AK 2 connecting cable SCART/RCA adapter 2 replacement ear pads Mini to 1/4" stereo adapter jack 1 replacement battery for headphones Please check that the packaging contains all of the items listed above. 1 Replacement Battery Packs, Separate Headphones The headphones will only operate with the supplied dedicated battery packs. You can also order separate K 216 AFC headphones from your AKG dealer. 2 Replacement Ear Pads To mount the supplied, more solid replacement ear pads, refer to fig. Check that the AC mains voltage stated on the AC adapter is identical with the AC mains voltage in your area. Operating the AC adapter off a different AC mains voltage may damage the unit. Before connecting the transmitter to your audio source (TV set, radio, hi-fi system, etc. Connect the transmitter to your audio source using the supplied AK 2 connecting cable (white = left-hand channel, red = right-hand channel). Before switching power to your system on, please note: · Using headphones at high volume levels, particularly for extended periods of time, may damage your hearing. ⷠOperating switches on your hi-fi system or connecting the transmitter to your audio source may cause clicks, which at high volume settings may affect your hearing. Therefore, be sure to set the volume control on the headphones to minimum (see fig. 5) before switching between different sources (tuner, turntable, CD player, etc. Interference caused by other users of the same frequency band is beyond AKG's control. If a battery pack is being charged inside the transmitter, the appropriate charging LED will remain lit red. Note: If no signal arrives at the transmitter input for five minutes, the transmitter will switch off automatically and the green transmitter status LED will go out. Before you can use the headphones, you will need to charge the battery pack inside the headphones. [. . . ] You hear unwanted noise (whistling, hiss, crackling) in the headphones: - Refer to fig. 9: Replace the battery pack in the headphones with the fully charged replacement battery pack. Allow the ear pads to dry completely and replace them on the speaker capsules. To order a free copy of the Declaration of Conformity, visit http://www. [. . . ]