User manual AIWA XS-DS70

[. . . ] Compact Disc Stereo System XS-DS70 U OPERATING INSTRUCTIONS En (English) MANUAL DE INSTRUCCIONES E (Español) MODE D'EMPLOI F (Français) For assistance and information (United States and Puerto Rico) 8B-NCJ-903-01 010125AMI-U-M PRECAUTIONS Read these Operating Instructions carefully and completely before operating the unit. All precautions on this booklet and on the unit should be strictly followed. Installation 1 Water and moisture -- Do not use this unit near water, such as near a bathtub, washbowl, swimming pool, or the like. 2 Heat -- Do not use this unit near sources of heat, including heating vents, stoves, or other appliances that generate heat. [. . . ] * Move the Window up to reveal the operation buttons with WINDOW UP if needed. Preset tuning Preset your favorite stations and tune them in directly. Manual tuning 1 Press FM or AM (TUNER/BAND on the remote control) to select a band (FM or AM). The unit switches to the radio from any other function. Presetting stations 1 Press FM or AM to select the band. 3 Press aSET to store the station. The preset number, beginning from "1", appears on the display. To clear a preset station 1 Tune in to the station by preset tuning. Preset numbers of preset stations in the band with higher numbers decrease by one. 2 Press fDOWN or gUP to tune in to a station. "TUNE" is displayed when a station is tuned in. To search for a station automatically (Auto Search) Hold down fDOWN or gUP. The unit searches for a station up or down the band and stops at reception. ·Auto Search may not stop at stations with weak signals. 4 Repeat step 1 to 3 to preset other stations. ·You cannot store more than a total of 32 preset stations. "FULL" is displayed. 14 Adjustments Antennas Keep antennas away from metallic objects, electrical equipment and cords. If receiving condition is poor, connect optional outdoor antenna to FM 75 terminal. To switch to monaural FM reception Press MONO TUNER on the remote control. With each press, "MONO" and "STEREO" are displayed alternately on the display. En Tip: When FM stereo reception is poor, switching to monaural reduces noise. To switch the AM tuning interval Hold down AM and press POWER. With each press, the AM tuning interval alternates between 9 kHz/step and 10 kHz/step. Tip: The default is 10 kHz/step. Switching AM tuning interval clears all the preset stations. 15 LISTENING TO EXTERNAL SOURCES Dolby Surround With this unit's built-in Dolby Digital decoder, video software recorded in Dolby Digital or Dolby Pro Logic can be played back in home theater sound. Dialogs are heard in the front and center sound field, while ambient sounds like cars and crowds are reproduced on all sides of the listener, all in all for an incredibly lifelike audiovisual experience. Dolby Pro Logic has four independent channels; left, center, right, and surround. These four channels are encoded into the two tracks of a conventional stereo program source. This unit's Dolby Digital decoder recovers these four channels on playback. Dolby Digital, in contrast to Dolby Pro Logic, is digitized, and has separate left and right surround channels plus an additional low-frequency effects (LFE) channel. Thus it is also referred to as "5. 1-channel" Dolby Digital, with the LFE channel counted as "0. 1" channel. Dolby Digital software is marked with the logo. En * Move the Window up to reveal the operation buttons with WINDOW UP if needed. Playing an analog source (Playing equipment connected to the VIDEO/AUX jacks) 1 Select analog input. Press VIDEO/AUX/DVD and then press DIGITAL/ANALOG to select "ANALOG" Playing a digital source (Playing equipment connected to the DIGITAL IN (PCM/DOLBY DIGITAL) OPTICAL (VIDEO) jack) 1 Select digital input. Press VIDEO/AUX/DVD and then press DIGITAL/ANALOG to select "DIGITAL". The "DIGITAL" indicator lights up on the display. 2 Play the connected equipment. To adjust the sound level of the external analog source When the analog signal input from the connected equipment is too high, "OVERLEVEL" lights up continuously on the display. When this occurs, or when the sound level is much lower than that of other function sources, adjust the sound level. 2 Press f or g so that the sound level becomes the same as that of other function sources. 2 Play the connected equipment. ·When digital input is selected, the BBE system is automatically canceled. [. . . ] To cancel the sleep timer Press SLEEP twice on the remote control so that "SLP oFF" is displayed. 3 Press f or g to set the timer-on time, then press aSET or ENTER. ·MULTI JOG is also available in place of f or g. 21 To display the timer setting Press TIMER on the remote control repeatedly until " PLAY" is displayed. The timer-on time, the source and the timer-activated duration are displayed for 6 seconds. En Tip: Timer setting can be displayed even while the unit is turned off, and at that time if you press ENTER or a within 6 seconds after TIMER on the remote control is pressed, you can enter the timer setting mode and change the setting. To change the timer setting Re-set the timer again. To cancel the timer Press FUNCTION MODE repeatedly until "TIMER" is displayed, turn MULTI JOG to select " OFF" within 4 seconds, and then press ENTER within 4 seconds. On the remote control, press TIMER repeatedly until " OFF" is displayed. Tip: Your timer setting is retained even if the timer is canceled. [. . . ]