User manual AIWA XD-AX10

[. . . ] 3-081-707-11(1) CD/DVD Player Operating Instructions For customers in the U. S. A Owner's Record The model and serial numbers are located at the rear of the unit. Refer to them whenever you call upon your Aiwa dealer regarding this product. XD-AX10 Serial No. ______________ For assistance and information visit us on the internet at www. us. aiwa. com call toll free 1-800-BUY-AIWA For Customers in Canada If this product is not working properly, please call 1-877-869-2492 for Peace of Mind Warranty Replacement service. For other product related questions please contact our Customer Information Service Centre at 1-877-869-2492 or write to us at: Customer Information Service 115 Gordon Baker Road, Toronto, Ontario, M2H 3R6 XD-AX10 © 2003 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] When Program Play or Shuffle Play is activated · ON: repeats Program Play or Shuffle Play. 34 To return to normal play Press CLEAR, or select "OFF" in Step 2. z Hints · You can set Repeat Play while the player is stopped. · You can also select "REPEAT" from the Control Bar (page 13). 3 During playback, when you find the starting point (point A) of the portion to be played repeatedly, press ENTER. The starting point (point A) is set. A13 ­ 0:27:34 B Playing Discs Note You cannot use this function with VIDEO CDs with PBC playback. 4 When you reach the ending point (point B), press ENTER again. The set points are displayed and the player starts repeating this specific portion. Repeating a specific portion (AB Repeat Play) You can play a specific portion of a title, chapter or track repeatedly. (This function is useful when you want to memorize lyrics, etc. ) To return to normal play Press CLEAR. To turn off the Control Bar Press DISPLAY repeatedly until the Control Bar is turned off. Note CLEAR When you set A-B Repeat Play, the settings for Shuffle Play, Repeat Play, and Program Play are canceled. ENTER DISPLAY 1 Press DISPLAY during playback. The following Control Bar appears. 2 Press C/c to select REPEAT). (A-B 35 Playback direction ×2B t 1M t 2M t 3M Searching for a Scene Searching for a Particular Point on a Disc (Scan, Slow-motion Play, Search, Freeze Frame) You can quickly locate a particular point on a disc by monitoring the picture or playing back slowly. 3M (DVD/VIDEO CD only) ×2B (DVD/CD only) Opposite direction ×2b t 1m t 2m t 3m 3m (DVD/VIDEO CD only) ×2b (DVD only) The "×2B"/"×2b" playback speed is about twice the normal speed. The "3M"/"3m" playback speed is faster than "2M"/"2m" and the "2M"/"2m" playback speed is faster than "1M"/ "1m. " Watching frame by frame (Slowmotion play) STEP STEP Press m or M when the player is in pause mode. Each time you press m or M during Slow-motion play, the playback speed changes. With each press the indication changes as follows: Playback direction 2 2 y1 y1 " playback speed is slower . " Opposite direction (DVD only) Note Depending on the DVD/VIDEO CD, you may not be able to do some of the operations described. The "2 y"/"2 than "1 y"/"1 Locating a point quickly by playing a disc in fast forward or fast reverse (Scan) Press m or M while playing a disc. With each press the indication changes as follows: To locate a point quickly using the PREV (previous)/NEXT button (Search) You can search for a particular point on a disc using . During playback, press and hold > on the player to locate a point in the playback direction, or press and hold . When you find the point you want, release the button to return to normal playback speed. 36 Playing one frame at a time (Freeze Frame) When the player is in the pause mode, press STEP to go to the next frame. To return to normal playback, press H. Searching for a Title/ Chapter/Track/Scene, etc. (Search mode) You can search a DVD by title or chapter, and you can search a VIDEO CD/CD by track, index, or scene. As titles and tracks are assigned unique numbers on the disc, you can select the desired one by entering its number. Or, you can search for a scene using the time code. Searching for a Scene Number buttons CLEAR SEARCH MODE ENTER 1 Press SEARCH MODE. The following display appears. The number in parentheses indicates the total number of titles, tracks, indexes, scenes, etc. of the disc. ­ ­(10) , continued 37 2 Press SEARCH MODE repeatedly to select the search method. When playing a DVD TITLE CHAPTER TIME/TEXT NUMBER INPUT Select "TIME/TEXT" to search for a starting point by inputting the time code. When playing a VIDEO CD without PBC playback TRACK INDEX When playing a VIDEO CD with PBC Playback SCENE INDEX When playing a CD TRACK INDEX When playing a DATA CD (MP3 audio) ALBUM TRACK Notes · You cannot search for a scene on a DVD+RW using the time code. · The title, chapter, or track number displayed is the same number recorded on the disc. 3 Select the number of the title, track, scene, time code, etc. you want by pressing the number buttons to select the digit. For example, to find the scene at 2 hours, 10 minutes, and 20 seconds after the beginning, select "TIME/TEXT" in Step 2 and enter "2:10:20. " If you make a mistake Cancel the number by pressing CLEAR, then select another number. 4 Press ENTER. The player starts playback from the selected number. z Hint When the display is turned off, you can search for a chapter (DVD) or track (CD) by pressing the number buttons and ENTER. 38 Viewing Information About the Disc Checking the Playing Time and Remaining Time You can check the playing time and remaining time of the current title, chapter, or track. Also, you can check the DVD/CD text or track name (MP3 audio) recorded on the disc. When playing a DVD · T *:*:* (hours: minutes: seconds) Playing time of the current title · T­ *:*:* Remaining time of the current title · C *:*:* Playing time of the current chapter · C­ *:*:* Remaining time of the current chapter When playing a VIDEO CD (with PBC functions) · *:* (minutes: seconds) Playing time of the current scene When playing a VIDEO CD (without PBC functions) or CD · T *:* (minutes: seconds) Playing time of the current track · T­*:* Remaining time of the current track · D *:* Playing time of the current disc · D ­*:* Remaining time of the current disc When playing a DATA CD (MP3 audio) · *:* (minutes: seconds) Playing time of the current track Viewing Information About the Disc TIME/TEXT DISPLAY When playing a Super VCD · T *:* (minutes: seconds) Playing time of the current track 1 Press TIME/TEXT during playback. The following display appears. T 1:01:57 To check the DVD/CD text or track name (MP3 audio) Press TIME/TEXT repeatedly in Step 2 to display text recorded on the DVD/CD/DATA CD. For DATA CDs, only the track name of the MP3 audio track appears. BRAHMS SYMPHONY Time information 2 Press TIME/TEXT repeatedly to change the time information. The display and the kinds of time that you can change depend on the disc you are playing. , continued 39 Checking the information on the front panel display You can view the time information and text displayed on the TV screen also on the front panel display. The information on the front panel display changes as follows when you change the time information on your TV screen. When playing a VIDEO CD (without PBC functions) or CD Playing time and number of the current track Remaining time of the current track When playing a DVD Playing time of the current title Playing time of the disc Remaining time of the current title Remaining time of the disc Playing time of the current chapter Text Remaining time of the current chapter Current track and index number (returns to top automatically) Text z Hints · When playing VIDEO CDs with PBC functions, the scene number or the playing time are displayed. · Long text that does not fit in a single line will scroll across the front panel display. [. . . ] The rear channel is stereo and there is a discrete subwoofer channel in this format. Dolby Digital provides the same 5. 1 discrete channels of high quality digital audio found in Dolby Digital cinema audio systems. Good channel separation is realized because all of the channel data are recorded discretely and little deterioration is realized because all channel data processing is digital. The picture data uses the MPEG 2 format, one of the worldwide standards of digital compression technology. The picture data is compressed to about 1/40 (average) of its original size. [. . . ]