User manual AIWA HV-GX1100
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AIWA HV-GX1100. We hope that this AIWA HV-GX1100 user guide will be useful to you.
Manual abstract: user guide AIWA HV-GX1100
Detailed instructions for use are in the User's Guide.
[. . . ] Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Don't throw away the battery with general house waste, dispose of it correctly as chemical waste.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Load a recorded/recordable tape in deck A or B with the side you want to play/record facing forward.
With the side you want to play/record facing forward.
1 2
Load a tape. When you load a tape in deck B, press PLAY MODE repeatedly to select "g" to play one side. Select "j"1) to play both sides.
To play both decks in succession, press PLAY MODE repeatedly until "RELAY" (Relay Play)2) appears in the display.
3
Press N (or hH on the unit).
The tape starts playing. Press the button again to play the reverse side.
1)
2)
The tape deck stops automatically after repeating the sequence five times. Relay Play always follows this cyclic sequence up to five times, then stops: Deck A (front side) t Deck B (front side) t Deck B (reverse side)
For other models
1
Load a tape.
To play both decks in succession, press PLAY MODE repeatedly until "RELAY" (Relay Play)* appears in the display.
2
Press N.
The tape starts playing.
* After the playback of the front side of deck A, deck B plays the front side, then stops.
18GB
Other Operations
To Do this
Stop play Pause Fast-forward or rewind Remove a tape
Press x. Press PUSH Z on the unit.
Tape Recording
Recording your favorite CD tracks on a tape
-- CD-TAPE Synchro Recording
You can record a whole CD on a tape. Use buttons on the unit for the operation.
Searching for the beginning of the current or the next track (AMS1)) To go forward
Press > (or turn AMS operation dial on the unit clockwise) during forward playback. (or turn AMS operation dial on the unit counterclockwise) during reverse playback on deck B. 2) "TAPE B <<< +1" appears.
Tape Play/Tape Recording
1 2
Load a recordable tape into deck B, then press TAPE A/B repeatedly to select deck B. (JAX-N88/N77/N66/N33/PK88/PK77/ PK66 only) Press PLAY MODE repeatedly to select "g" to record on one side. Select "j" (or "RELAY") to record on both sides.
To go back
Press . (or turn AMS operation dial on the unit counterclockwise) during forward playback. Use buttons on the remote for the operation.
Falling asleep to music
-- Sleep Timer
You can set the system to turn off after a certain time, so that you can fall asleep to music.
Press SLEEP.
1
Prepare the sound source you want to play.
Each time you press the button, the minute display (the turn-off time) changes cyclically as follows: AUTO* t 90MIN t 80MIN t 70MIN t . . . t 10MIN t OFF
* The system automatically turns off in 100 minutes or after the current disc or tape finishes playing.
· CD: Load a disc. To start from a specific track, make a program (see "Creating your own program" on page 13). · Tape: Load a tape with the side you want to play facing forward. · Tuner: Tune in the preset radio station (see "Listening to the radio" on page 16).
Timer
Other Operations
To Press
2 3 4
Press VOLUME +/ to adjust the volume. or > repeatedly to select "PLAY SET", then press ENTER.
Check the remaining time* Change the time to turn off
SLEEP once. SLEEP repeatedly to select the time you want.
Cancel the Sleep SLEEP repeatedly until "SLEEP Timer Function OFF" appears. * You cannot check the remaining time if you select "AUTO".
Note
"ON" appears and the hour indication flashes.
5
Set the time to start playing.
Do not set to "AUTO" during Synchro Recording on a tape.
Tip
Press . or > repeatedly to set the minute, then press ENTER.
You can use the Sleep Timer, even if you have not set the clock.
6 7
Set the time to stop playing following the same procedure as step 5. or > repeatedly until the desired sound source appears.
Each time you press the button, the display changes cyclically as follows:
t TUNER y CD PLAY T t TAPE PLAY T
continued
23GB
8
Press ENTER.
The type of timer ("PLAY TIMER"), the start time, the stop time, and the sound source appear in turn, before the original display returns.
Timer recording radio programs
-- Rec Timer
You can record a preset radio station from a specified time. To timer record, you must first preset the radio station (see "Presetting radio stations" on page 14) and set the clock (see "Setting the clock" on page 9). [. . . ] · Discs with non-standard shapes (e. g. , heart, square, star) cannot be played on this unit. Do not use such discs.
On placement
· Do not place the system in an inclined position. · Do not place the system in locations where it is; Extremely hot or cold Dusty or dirty Very humid Subject to vibrations Subject to direct sunlight. · Use caution when placing the unit or speakers on surfaces that have been specially treated (with wax, oil, polish, etc. ) as staining or discoloration of the surface may result.
Additional Information
On heat buildup
· Although the system heats up during operation, this is not a malfunction. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AIWA HV-GX1100
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AIWA HV-GX1100 will begin.