User manual AIWA AWP-ZP5

[. . . ] 4-253-925-13(1) Operating Instructions Owner's Record The model and serial numbers are located on the rear of the unit. Refer to them whenever you call upon your Aiwa dealer regarding this product. ______________ ©2004 Sony Corporation CAUTION WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] Press SLEEP repeatedly to select the time you want. Cancel the Sleep Press SLEEP repeatedly until Timer function "OFF" appears. * You cannot check the remaining time if you select "AUTO". Tip "ON TIME" appears and the hour indication flashes. 5 Set the time to start playing. You can use the Sleep Timer, even if you have not set the clock. Press . or > repeatedly to set the minute, then press ENTER. 6 7 Set the time to stop playing following the same procedure as step 5. or > repeatedly until the desired sound source appears. Each time you press the button, the display changes as follows: TUNER y CD PLAY 8 Press ENTER. "PLAY TIMER", the start time, the stop time and the sound source appear in turn, then the original display returns. 9 Press ?/1 to turn off the system. 18GB Other operations To Do this Activate the timer/ check the setting 1 Press CLOCK/TIMER SELECT. 2 Press . or > repeatedly until "SELECT TIMER ON?" appears, then press ENTER. Change the setting Cancel the timer Start over from step 1. 1 Press CLOCK/TIMER SELECT. 2 Press . or > repeatedly until "SELECT TIMER OFF?" appears, then press ENTER. Notes Timer · If you use the Play Timer and the Sleep Timer at the same time, the Sleep Timer has priority. · Do not operate the system from the time the system turns on until the play starts (about 15 seconds before the preset time). · If the system is on about 15 seconds before the preset time, the Play Timer will not be activated. · You cannot use the optional component connected to MD jacks or USB port (except for AWP-ZP1) as the sound source for Play Timer. 19GB Display Turning off the display -- Power Saving Mode The demonstration display (display window and buttons lighting and flashing even when the system power is off) and the clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode). Press DISPLAY repeatedly while the system is off until the demonstration display or the clock display disappears. Viewing information about the disc in the display You can check the playing time and remaining time of the current track or that of the disc. Checking the remaining time and titles (CD/MP3) Press DISPLAY during Normal Play. To cancel Power Saving Mode Press DISPLAY while the system is off. Each time you press the button, the display switches cyclically as follows: Demonstration display t Clock display* t No display (Power Saving Mode) * The clock is displayed only if you set the clock. Tips Each time you press the button, the display changes cyclically as follows: Current track number and elapsed playing time t Current track number and remaining time1) t Remaining time of the disc2) t Track title (disc with MP3 audio tracks3) only) t Album name (disc with MP3 audio tracks only) t Clock display 1) 2) · ?/1 indicator lights up even in Power Saving Mode. · The timer continues to operate in Power Saving Mode. 3) "­ ­. ­ ­" appears when playing back MP3 audio tracks. "­ ­. ­ ­" appears in program play mode or when playing back MP3 audio tracks. When you play back a track with an ID3 tag ver. 1 or ver. 2, the ID3 tag appears. The ID3 tag displays only the track title information. 20GB Checking the total playing time and titles (CD/MP3) Press DISPLAY in stop mode. Checking the station name (TUNER) Press DISPLAY while listening to the radio. Each time you press the button, the display changes cyclically as follows: x When a CD/MP3 is in Normal Play mode TOC display1) or total album number of the disc2) or total track number of the current album3) t Volume label4) t Album name4) t Clock display 1) Each time you press the button, the display changes cyclically as follows: Station name1) t Preset number2) and frequency t Clock display 1) 2) European model only Preset number is displayed only if you preset radio stations (page 13). 2) 3) 4) TOC = Table of Contents; displays total number of tracks on the disc, and total playing time of the disc For discs with MP3 audio tracks in Normal play or SHUF mode For discs with MP3 audio tracks in ALBM or ALBM SHUF mode For discs with MP3 audio tracks, album titles or volume label may not be displayed depending on the play mode. Notes x When a CD/MP3 is in Program Play mode The last track number of the program and the total playing time t Total track number of the program t Volume label* t Clock display * For discs with MP3 audio tracks · The total playing time is not displayed for a disc with MP3 audio tracks. · If the MP3 audio track you play back has an ID3 tag, the ID3 tag information is displayed as a track title. · In the following cases, elapsed playing time and remaining time of the track may not be displayed accurately. ­ when fast forward or fast reverse is performed. 21GB Display Required system equipment Optional Personal Computer (except for AWP-ZP1) The following environments are necessary for the computer to connect to the system. · USB port that supports USB 1. 1 or higher · IBM PC/AT compatible or Macintosh · Operating System installed at the factory: ­ For Windows users Windows 98 Second Edition, Windows 2000 Professional, Windows Millennium Edition, Windows XP Professional/Home Edition ­ For Macintosh users Mac OS 9. 0 to 9. 2 or X 10. 1 to 10. 3 Connecting a personal computer to the system Use the supplied USB cable for the connection. You can listen to the audio recorded in the computer's hard disk or on a CD-ROM loaded on the CD-ROM drive through the system's speakers. Personal computer To the USB port on a computer USB cable (supplied) To the USB port 22GB Notes · Operation is not guaranteed for all the recommended computer environments mentioned above. · Operation is not guaranteed in personally constructed PCs or operating systems. · Operation is not guaranteed in environments upgraded to the other operating systems. [. . . ] · Unplug the system from the wall outlet (mains) if it is not to be used for an extended period of time. · Should any solid object or liquid fall into the system, unplug the system and have it checked by qualified personnel before operating it any further. · AC power cord must be changed only at the qualified service shop. · Although the system heats up during operation, this is not a malfunction. · Place the system in a location with adequate ventilation to prevent heat build-up in the system. [. . . ]